Playback and Backup
Controlling the Time Range of the Playback Bar (ECO Blackbox+ Series Only)
The time range is the start and end times of the footage displayed in the Playback bar. By default, the Playback bar displays recordings recorded on the day selected for playback (from 00:00~24:00). You can change the time range to narrow in on a specific time.
To control the time range of the Playback bar:
1During Playback mode, click 
to open the time range controls.
Clicktoopentime range controls
2Click 30m, 1H, 2H, or 24H to select a time range. For example, if 30m is selected, the playback bar will show 15 minutes before to 15 minutes after the currently playing time.
OR
•To create a custom time range, click 
. The button will become colored. Move your mouse to the time you where you would like the range to start and click. Then, move your mouse to the time you where you would like the range to end and click. The start and end times will be replaced by the 1st and 2nd times that you clicked on.
Using Zoom in Playback Mode (ECO Blackbox+ Series Only)
You can use Zoom in Playback Mode. This is useful if you need a closer look at recorded video.
NOTE: Zoom is only available when a single channel is selected for Playback.
To use zoom in playback mode:
1Open Playback mode with only one channel selected. For details, see “Playing Back Recorded Video” on page 23.
2Click 
to open Zoom.
NOTE: Playback controls are not available when Zoom is activated. If you want to pause the video before you zoom, you will have to pause it before entering Zoom.
27
