Using the Main Menu
3In the Covert
4Click Apply to save your settings.
Configuring the Time and
Recording Time Display
To add/remove the time stamp in the system display:
1In the Show Time and Record Time
2Click Apply to save your settings.
Configuring Sequence Time
Sequence time refers to the amount of time a channel appears on the screen before changing to a different channel when the DVR is in Sequence Mode. For example, when Sequence Mode is on, channel 1 is shown for several seconds before switching to channel 2.
To configure the sequence time:
1Click the Output tab.
SEQ Dwell time
2Click the SEQ Dwell Time field and enter the time channels remains
3Click Apply to save your settings.
Changing the Video-out Resolution
1Click the Output tab.
2Click the
3Click Apply to save your settings.
4
5The DVR restarts and asks you to confirm the new resolution. Click Yes to confirm or No to revert to the old resolution. If you do nothing, the DVR will revert to the last selected resolution and restart.
Adjusting Menu Transparency
You can increase or decrease the transparency of the
To adjust the transparency of on-screen menus:
1Click the Output tab.
2Drag the Transparency slider to adjust transparency.
3Click Apply to save your settings.
Restoring the System’s Resolution if you see a Blank Screen
If you see a blank screen on your monitor after turning on your system, the DVR’s output resolution may be higher than what your monitor supports.
To restore the DVR to the default resolution (1024 x 768):
• Press and hold theStop ( ) button on the remote control for 6 seconds. The resolution will be reset and the DVR will restart.
37
