
Setting up your DVR for Remote Connectivity
3Click Download to download the plug-in for Safari.
Click Download
4Click the downloads button () on the
SurveillanceClient.dmg and click Open
5
6Quit Safari
7Enter http://, the IP address of the DVR, colon, and the HTTP port number of the DVR (e.g. http://192.168.5.118:80) into the address bar, as shown above.
8Enter the DVR username and password to log in to the system. By default, the username is admin, and the password is left blank.
Accessing your DVR Remotely over the Internet
Setting up remote connectivity allows you to view your DVR from any computer or compatible mobile device with Internet access.
NOTE: Except where noted, the instructions below are the same for PC and Mac.
To set up remote connectivity with your DVR, you must:
1Port forward the HTTP, Client, and Mobile ports (default: 80, 9000, and 1025) on your router to your DVR’s IP address.
2Create a DDNS account.
3Enable DDNS on the DVR.
4Test the remote connection by entering your DDNS address in a web browser.
60