Using the Main Menu

Click on the edge of a privacy area and drag to resize a privacy area.

Right-click when you are finished to exit.

5(Optional) Use the drop-downs next to Copy to copy privacy areas to another channel or all channels. Click the Copy button to copy privacy areas.

6Click Apply to save your settings.

Creating a Custom Split-screen

Display (ECO Blackbox+ Series

Only)

You can create a custom split-screen display and re-arrange where channels are placed.

TIP: You can use the steps below to create a custom split-screen display on a secondary monitor connected to the Video Out port. First, move the mouse and system interface to the Video Out monitor by pressing 0 three times on the remote control. Complete the steps, and then press 0 three times on the remote control again to return the mouse and system interface to the VGA or HDMI monitor. Your custom display will be saved on the secondary monitor.

To re-arrange the split-screen display:

1Select the Output tab.

2Under View Setup, select Enable. This lets you select and arrange the channels you want to show on the screen.

NOTE: Enabling View Setup disables your ability to change channels the normalwayon theselected monitor.

You will need to disable View Setup to return to normal operation.

Select Enable

Select display mode

Click Vout Setup

3Under View Mode, select the desired viewing mode: Single, Quad, Nine, or Sixteen.

4Click Vout Setup. A menu appears that allows you to select the arrangement of channels.

5Click the drop-down menus to select which channels to show on the screen and the arrangement of channels.

Select the arrangement of channels on screen

6Click Apply to save changes. Click Ok. Right-click repeatedly to exit all menus and return to live viewing.

39

Page 57
Image 57
LOREX Technology LH0181011C8F instruction manual To re-arrange the split-screen display