LOREX Technology LH0181011C8F instruction manual Enter the DVR’s Local IP Address into the Browser

Setting up your DVR for Remote Connectivity

2Write down the IP Address and HTTP Port number of the DVR.

•A local IP looks something like this: 192.168.5.118. Note that single digit numbers appear as three digits. For example, "005" is the same as "5".

•Write down the port number beside HTTP Port.

Step 3 of 3: Enter the DVR’s Local IP Address into the Browser

Follow the steps below to confirm connectivity over a local network on a PC or Mac.

To connect using the DVR’s Local IP Address on a PC:

1Open Internet Explorer.

NOTE: If you are connecting using Internet Explorer 9, you must use the 32-bit version. From

the Start Menu, click Internet Explorer. Do not click Internet Explorer (64-bit).

32-bit Internet

Explorer

2Enter http://, the IP address of the DVR, colon, and the HTTP port number of the DVR (e.g. http://192.168.5.118:80) into the address bar. You must include the HTTP port number of the DVR after the address.

Example (Connecting to a Local IP Address using Internet Explorer):

http://Colon

Local DVR IP Address HTTP Port number

58