LOREX Technology LH0181011C8F instruction manual Channel

mouse and system interface between BNC and VGA monitors, press 0 three times on the remote control.

NOTE: Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV connection).

3Audio Input: Input for 1 RCA audio-enabled camera (not included).

4Audio Output: Output for 1 RCA audio channel (e.g. speakers).

5VGA: Connect a VGA monitor (not included) to view the system interface.

6LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.

7USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data backup or firmware updates.

8RS485: Connect compatible PTZ cameras (not included).

9DC12V: Connect the included AC power adapter.

16-Channel

1 2 4 5 6 8 9 10

37

1Video Input: Connect BNC cameras.

2Video Output: Outputs the DVR interface to a BNC connection. This allows you to see your mouse cursor and have full control of the system on a secondary monitor. To switch the mouse and system interface between BNC and VGA monitors, press 0 three times on the remote control.

NOTE: Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV connection).

3Audio Output: Output for 1 RCA audio channel (e.g. speakers).

4Audio Input: Input for 2 RCA audio-enabled cameras (not included).

5VGA: Connect a VGA monitor (not included) to view the system interface.

6LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.

7USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data backup or firmware updates.

8RS485: Connect compatible PTZ cameras (not included).

9DC12V: Connect the included AC power adapter.

10On / Off Switch: Turns the DVR on or off.

3