LOREX Technology LH0181011C8F Connect the Monitor, Connect the Power Adapter and Power on the DVR

Basic Setup

Step 4: Connect the Monitor

•Connect a VGA cable (not included) from the VGA port to the monitor.

OR

•ECO Blackbox+ Series only: connect the included HDMI cable from the HDMI port to your HDTV or monitor.

8-channel model shown

VGA

16-channel ECO Blackbox+ shown

HDMI port (featured on

ECO Blackbox+ only)

Step 5: Connect the Power Adapter and Power on the DVR

•Connect the included power adapter to the DC 12V port. Connect the other end of the power adapter to a wall socket or a surge protector.

•16-channel models only: Turn the power switch to I to turn on the DVR.

•At startup, the system performs a basic system check and runs an initial loading sequence. After a few moments, the system loads a live display view.

8-channel model shown

Connect power adapter	16-channel: Connect
	power adapter and turn on
	power switch

Step 6: Verify Camera Image

•Power on the cameras, and then verify the camera video quality before mounting the cameras to a permanent location.

•Mountthecamerasunderashelteredlocation.Alwaysverifytheoutdoorratingofyourcamera before installing it in a permanent location.

7