Appendix B: Connecting a PTZ Camera
3Configure the following according to your PTZ camera’s specifications:
•Channel:SelectthechannelthePTZcamera is connected to.
•Protocol: Select from Pelco-D or Pelco-P
•Baud rate: Select the PTZ camera’s baud rate
•Data Bit: Select from 5~8 data bits.
•Stop Bit: Select from 1 or 2 stop bits.
•Parity: Select from None, Odd, Even, Mark or Space.
•Cruise: Select Enable to enable PTZ cruise.
•Address: Enter the PTZ camera’s address Use the Copy To
4Click Apply to save your settings.
Using the PTZ Menu (Local DVR)
To control the PTZ camera locally on your DVR:
1Select the channel that the PTZ camera is connected to.
2
3Use the
Channel:
Select the channel the PTZ camera connects to.
Speed Slider:
Increase or decrease the pan and tilt speed
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Direction keys: | Click the + and - symbols to | Camera | |||||
Click to pan and tilt the camera | adjust the camera Zoom, | controls | |||||
|
| Focus and Iris settings |
|
|
113