Appendix C: Connecting Additional External Monitors

Appendix C: Connecting Additional External Monitors

Use the Video Output ports (BNC) on the rear panel of the system to connect an external monitor(s). This is useful if you need to monitor the system from a second location (e.g. a back office).

The mouse and system interface are shown on either the VGA or BNC monitor. Press 0 on the remote control three times to switch the mouse and system interface between VGA and BNC monitors.

VGA cable

PRIMARY MONITOR (VGA)

(Not Included)

BNC cable

BNC cable

8-channel model shown

BNC to RCA adapter

To connect the DVR to a televisionusingRCAcables, connect a BNC to RCA adapter(notincluded)tothe VIDEO OUTPUT port.

EXTERNAL MONITORS

(Not Included)

ECO Blackbox+ Series Only: the DVR can simultaneouslydisplaythesysteminterfaceon monitorsconnectedtotheHDMIandVGAports.

NOTE: ECO Blackbox+ Series models only include 1 BNC Video Output port.

ECO Blackbox+ Series Only: Connect one monitor to the VGA port and one to the HDMI port to display the system interface on both monitors.

115

Page 133
Image 133
LOREX Technology LH0181011C8F instruction manual Appendix C Connecting Additional External Monitors, BNC to RCA adapter