LOREX Technology LH0181011C8F instruction manual Connecting BNC Cameras to your DVR

Basic Setup

Connecting BNC Cameras to your DVR

1Connect the male power connector on the BNC extension cable to the female power connector on the camera.

• Connect the BNC connector to the camera.

2Connect the female power connector on the BNC extension cable to the power adapter.

3Connect the BNC connector to one of the Video Input ports on the rear panel of the DVR.

4Plug the camera power adapter to a power outlet.

Digital Video Recorder (8-channel model shown)

BNC

Male power connector

BNC Extension cable

Female power connector

Connecting and Removing BNC Cables

BNC (Bayonet Nut Connector) is a special connector that locks on to the system port and cannot be accidently removed.

To connect or remove a BNC connector:

•Push the BNC connector firmly into the BNC port and simultaneously twist the connector clockwise to tighten.

•To remove a BNC connector from a BNC port, push and simultaneously twist the connector counter-clockwise to loosen the BNC connector.

10