Remote Viewing Interface
Configuring Basic Network Settings
The basic network menu allows you to configure the network protocol type (DHCP or Static), UPnP and mobile phone login information.
To configure basic network settings:
1Click the Remote Setting tab, and click Network.
2Configure the following under Basic Configuration:
•Type: Select between DHCP or Static. If you select Static, you can edit the IP address, Subnet Mask, Gateway, and DNS settings.
•AutoPortForwarding:SelectEnable orDisable toenableordisabletheAutoPortForwarding feature.
3Click Save to apply your settings.
Configuring the System Substream
You can adjust the data streaming rate (also called the SubStream) when you connect to the system remotely. If you want to conserve bandwidth, select a lower frame rate and bitrate.
NOTE: Setting your system to stream with a lower frame and bitrate may cause the video to appear choppy or slow.
To configure the system’s substream:
1Click the Remote Setting tab, and click Network>SubStream.
79
