Smeg STX4-3 Troubleshooting, Table of Faults Detected by the SELF-DIAGNOSTICS System

Page 22

User instructions

6. Troubleshooting

The dishwasher is equipped with a self-diagnostics system that is capable of detecting and signalling a number of possible faults.

In the event of a fault or malfunction, before calling the After-sales service centre, we suggest that you first consult the troubleshooting guide below.

If the problem persists even after implementing the recommended solutions, call the After-sales service centre after having carried out the following:

•making a note of the message displayed by the self-diagnostics system;

•unplug the power cord from the socket;

•shut off the water supply tap.

 

 

TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM

 

 

 

FAULT

DESCRIPTION

 

 

 

E2

 

The system which limits the water level inside the dishwasher (Level Safety Device) has

 

been tripped.

 

 

Since the cause might be a temporary failure, try reprogramming the dishwasher.

 

 

If the problem persists, call the authorised technical service centre.

 

 

 

E3

 

The dishwasher fails to heat the water.

 

To reset the appliance, open and close the door.

 

 

To determine the cause of this problem call the authorised technical service centre.

 

 

 

E4

 

The temperature monitoring system has failed.

 

Switch the dishwasher off, switch it back on and restart the washing program. If the alarm recurs,

 

 

call the After Sales Service.

 

 

 

 

 

The dishwasher fails to draw water.

 

 

Check that:

E5

 

• the water supply tap is open;

 

• the filter in the water intake hose is not clogged;

 

 

• the water intake hose is not kinked or bent.

 

 

Switch the dishwasher off and back on. If the problem is resolved the washing program will resume

 

 

from where it was halted.

 

 

If the fault persists, call the authorised technical service centre.

 

 

The dishwasher fails to drain.

 

 

Check that:

E6

 

• the flexible drain hose is not kinked or obstructed;

 

• the water drain pipe is not obstructed;

 

 

• the dishwasher filter is not clogged.

 

 

Switch the dishwasher off and back on. If the problem is resolved, the washing program will

 

 

resume from where it was halted.

 

 

Otherwise, if the fault persists, call the authorised technical service centre.

 

 

 

E7 / E9

 

The appliance is not able to "measure" the amount of water loaded (for models equipped

 

with this device only).

 

 

Since the cause might be a temporary failure, try reprogramming the dishwasher.

 

 

If the problem persists, call the authorised technical service centre.

E8

 

Alternate washing device locked out (for models with this feature only).

 

Open the door and close it again; if the problem persists the authorised after-sale service centre

 

 

will have to be called in.

In the event of error codes not included in this table, call the Technical Service Centre.

41

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Dishwasher Contents Safety instructions Safety and operating instructionsAquastop Models Connecting to the Water Supply Installation and hook-upWater supply connection Electrical connection Drain ConnectionUpper panel Description of the controlsInformation display Annulling the Program in Progress Switching OFFDelaying the Program Modifying the ProgramTable of Programs Washing programs Removing the DishesUsing the water softening system Operating instructionsSetting Water Hardness Regeneration Adjusting the Water Softening SystemElectronic Setting Switch SettingAdjusting the Rinse AID Dispenser Setting Using the rinse aid and detergent dispensersWater Hardness Table Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations Lower Basket Using the basketsLoading the Lower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketCleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Spray ARM, Travelling VersionCleaning the Filter Unit Prolonged DisuseTroubleshooting Minor Problems Table of Faults Detected by the SELF-DIAGNOSTICS System TroubleshootingFault Description Technical Data 598 Vorrichtung für die Einstellung der Spannung der Türfedem

STX4-3 specifications

The Smeg STX4-3 is a versatile and stylish appliances designed to elevate your culinary experience. Known for its stunning retro aesthetic, the STX4-3 combines classic design with modern functionality. This four-burner gas cooktop provides the ideal surface for a variety of cooking techniques, making it an excellent choice for both novice cooks and seasoned chefs.

One of the standout features of the Smeg STX4-3 is its four powerful burners. Each burner is designed to offer different levels of heat output, allowing users to adapt to various cooking needs, from simmering delicate sauces to searing meats at high temperatures. The burners are made from durable materials, ensuring longevity and easy maintenance.

Another key element of the STX4-3 is its innovative Flame Failure Device. This safety feature ensures that if the flame goes out unexpectedly, the gas supply is automatically cut off, providing peace of mind during cooking. This technology is particularly beneficial for families with children or for anyone concerned about safety in the kitchen.

The design of the Smeg STX4-3 is equally impressive. Its iconic retro style, characterized by rounded edges and vibrant colors, allows it to become a focal point in any kitchen. Available in a variety of finishes, including classic white, bold red, and sleek black, this cooktop can complement a range of kitchen aesthetics.

Additionally, the STX4-3 features high-quality cast iron grates, which provide optimal support for cookware. These grates not only offer excellent heat retention and distribution but also are designed for easy cleaning. The surface is easy to wipe down, making post-cooking clean-up a breeze.

The gas cooktop is equipped with user-friendly controls that offer precise heat adjustments. The ergonomic knobs are designed for comfortable grip and easy operation, even when hands are busy or dirty.

In terms of installation, the Smeg STX4-3 is designed for easy integration into any kitchen layout. It can fit seamlessly into a countertop, which enhances the overall functionality and aesthetics of kitchen space.

Overall, the Smeg STX4-3 combines elegance and performance, making it an excellent choice for consumers seeking both style and functionality in their kitchen appliances. Whether you’re frying, boiling, or sautéing, this cooktop promises to meet your cooking needs with flair and efficiency.
Top Page Image Contents