Smeg DI912 instruction manual If the Appliance is Provided with a Plugless Supply Cord

Page 8

Installation instructions

IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:

IT IS NECESSARY TO INSTALL IN THE FIXED WIRING AN ALL-POLE DISCONNECTION DEVICE HAVING A GAP BETWEEN CONTACTS OF AT LEAST 3.5MM. AFTER INSTALLATION THE DISCONNECTION DEVICE HAS TO BE EASY TO REACH.

THE CONNECTION TO THE MAINS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN IN ACCORDANCE TO THE SCHEME SHOWN BELOW AND THE REGULATIONS IN FORCE.

L = brown N = blue

= yellow-green

In the event of damage to the supply cord, have it replaced by the an Authorized Technical Service Centre in order to avoid any risk.

If this lamp needs changing, contact the manufacturer or an Authorised Service Centre.

The lamp must be of the same type and have the same characteristics as the one already installed (see dataplate next to the lamp holder).

WHEN CLEANING AND MAINTAINING THE APPLIANCE:

BEFORE CARRYING OUT ANY WORK, ALWAYS UNPLUG THE APPLIANCE FROM THE ELECTRICAL SUPPLY OR SWITCH OFF THE ALL-POLE DISCONNECTION DEVICE.

WARNING!

Some components inside the appliance are intentionally electrically live even with the ON/OFF switch turned to off.

Before any repair operation, disconnect the appliance from the electrical mains.

43

Image 8

Contents Dishwasher Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation instructions Installation and hook-upDrain Connection Electrical connection and precautionsWater supply connection When Cleaning and Maintaining the Appliance If the Appliance is Provided with a Plugless Supply CordFuse replacement For UK onlyDescription of the controls Upper panelProgram Delay Button Option ButtonOption Light WASH-ZONE ButtonSetting the Washing Program and Switching on DirtWash at 45C Cold rinse Table for Certification Bodies Cancelling the Current ProgramWashing programs Changing the Program Extra ProgramsTo Save on ENERGY! … and Protect the Environment Adjusting the Water Softening System Water Hardness TableEND of Cycle Removing the DishesUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations 1 ProductsUser instructions Using the baskets User instructions Cutlery Basket Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit General Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Troubleshooting Fault DescriptionWater intake system malfunction Technical Data Page Min ,2 max ,2 kg