Smeg ADP8242 manual Not Working Properly, If the dishes are not clean at the end of the program

Page 17

Not Working Properly cont...

15

If the dishes are not clean at the end of the program

Check whether:

-the right washing program has been used;

-the detergent dispenser has opened correctly;

-the right amount of detergent has been placed in the dispenser;

-the dishes have been arranged correctly;

-the spray-arms turn freely;

-the water tap has been turned on;

-the spray arm nozzles are blocked;

-the filler hose filter is fouled;

-the main water pressure is correct;

-there is salt in the water softener.

If the dishwasher does not work

Check that:

-the connection to the power supply socket and the fuse;

-there is not a power supply blackout;

-the water tap is turned on;

-the door is closed correctly;

-the filler hose filter is not fouled;

-the filler and drain hoses are not creased.

Image 17
Contents ADP S H W a S H E RContents Connection to Waste Pipe InstallationStage Installation Loading the Top Basket LoadingLoading the bottom basket What not to Load Adjusting the Top BasketYour Dishwasher Adding rinse-aid Detergent and Rinse Aid DispenserFilling with detergent Filling with salt Adjusting the water softenerWater Softener Programme Selector lights Control PanelFirst Wash Operation Table of Programs Cleaning the Appliance Cleaning and Maintenance Cleaning the Water Intake Filter Cleaning the Spray ArmsIf the dishwasher is to be out of use for a long period How to Deal with Small ProblemsBefore re-using the dishwasher after a lay-off Technical Details General and Technical DetailsIf the dishwasher does not work If the dishes are not clean at the end of the programNot Working Properly This Appliance Must be Earthed Electrical ConnectionsProcedure when reporting a fault Months Guarantee