Smeg ADP8242 How to Deal with Small Problems, Before re-using the dishwasher after a lay-off

Page 15

How to Deal with Small Problems

13

If the dishwasher is to be out of use for a long period

The following precautions must be taken:

-perform two consecutive pre-rinses;

-disconnect the plug from the mains;

-leave the door slightly open so that no unpleasant smells can form;

-turn off the water tap.

Before re-using the dishwasher after a lay-off

-Re-connect the plug to the power socket;

-check that no sludge or rust has been deposited in the water supply pipeline;

-allows water to flow freely from the supply tap for a few minutes;

-re-connect the filter hose and turn the water tap back on.

The dishwasher is able to signal a series of a malfunctions by illuminating more than one light simultaneously; the key to these signals is as follows:

E1

E2

E3

E4

E5

E6

The anti-flooding signal has been tripped (for models fitted with AQUASTOP device only).

This alarm is only tripped if water leaks from the dishwasher. The after-sales service must be called on.

The dishwasher has loaded too much water and the safety level switch has been tripped.

Repeat the cycle. If the problem persists, contact the after-sales service.

The dishwasher is unable to heat the water.

Repeat the cycle. If the problem persists, contact the after-sales service.

The temperature monitoring system has failed. Switch the dishwasher OFF, switch it back on and restart the washing program. If the alarm recurs, call the after-sales service.

The dishwasher is unable to take in water.

Check the intake hose for kinks and ensure that the siphon is not blocked or the filters fouled.

The dishwasher is unable to discharge the water from the tank.

Check the intake hose for kinks and ensure that the siphon is not blocked or the filters fouled.

-led on

-led off

-flashing led

If an alarm occurs the appliance interrupts the program in progress and signals a fault. In case of E1, E2, E3 and E4, the washing program must be set again to continue.

In case of E5 and E6, simply open and close the door to continue (once the cause of the fault has been illuminated).

Page 14 Page 16
Image 15
Page 14 Page 16
Contents ADP S H W a S H E RContents Connection to Waste Pipe InstallationStage Installation Loading Loading the bottom basketLoading the Top Basket What not to Load Adjusting the Top BasketYour Dishwasher Detergent and Rinse Aid Dispenser Filling with detergentAdding rinse-aid Adjusting the water softener Water SoftenerFilling with salt Programme Selector lights Control PanelFirst Wash Operation Table of ProgramsCleaning the Spray Arms Cleaning and MaintenanceCleaning the Appliance Cleaning the Water Intake FilterHow to Deal with Small Problems Before re-using the dishwasher after a lay-offIf the dishwasher is to be out of use for a long period Technical Details General and Technical DetailsIf the dishes are not clean at the end of the program Not Working ProperlyIf the dishwasher does not work This Appliance Must be Earthed Electrical ConnectionsProcedure when reporting a fault Months Guarantee

ADP8242 specifications

The Smeg ADP8242 is a high-quality dishwasher that seamlessly blends elegance with cutting-edge technology. As part of Smeg's renowned line of premium appliances, the ADP8242 is designed to meet the demands of modern kitchens while offering exceptional performance and user convenience.

One of the most notable features of the ADP8242 is its spacious capacity, which holds up to 13 place settings. This makes it an ideal choice for families or anyone who enjoys hosting gatherings. The dishwasher is designed with adjustable racks and a third cutlery drawer, allowing for flexibility in loading various types of dishware, including larger pots and pans.

The ADP8242 incorporates an energy-efficient A++ rating, meaning it operates with minimal energy consumption, which not only helps the environment but also saves on utility bills. Additionally, it boasts a low noise level of just 48 dB, ensuring that it operates quietly, making it perfect for open-plan living spaces or for running during nighttime hours.

Equipped with a range of innovative technologies, the Smeg ADP8242 features the Smeg's patented "Zone Wash" system. This technology enables the user to focus cleaning power on either the upper or lower rack, depending on the load, making it more efficient for less dirty dishes. Moreover, the innovative "Smart Wash" program automatically adjusts the wash settings based on the load's dirtiness level, providing optimal cleaning results with minimal water and energy usage.

Another standout characteristic of the ADP8242 is its user-friendly interface. The dishwasher features a digital display that provides clear feedback on wash cycles and remaining time. The delay start function allows users to set the dishwasher to begin at a more convenient time, offering flexibility for busy lifestyles.

Safety is also a priority, as the Smeg ADP8242 comes equipped with a child lock feature and a flooding protection system to prevent any potential water damage. Its sleek stainless steel finish gives it a modern aesthetic, complementing a variety of kitchen styles while ensuring durability.

In summary, the Smeg ADP8242 is a stylish and functional dishwasher that excels in capacity, efficiency, and innovative features. Its combination of advanced technologies and practical design makes it a valuable addition to any contemporary kitchen, ensuring that washing dishes is both effective and effortless.
Top Page Image Contents