Smeg CSE66-I2 instruction manual Troubleshooting, Fault

Page 25

User instructions

6. Troubleshooting

The dishwasher is equipped with a self-diagnostics system that is capable of detecting and signalling a number of possible faults.

FAULT

E1

E2 - E9

E3

E4

E5

E6

E7

E8

TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM

DESCRIPTION

The anti-flooding system (where present) has been tripped.

The water level limitation system has tripped.

The appliance cannot heat the water.

The temperature sensor is disconnected.

The appliance cannot take in the water.

The appliance cannot drain the water from the tank.

The dishwasher cannot measure the precise water quantity that has been loaded.

Problem on the water distribution system to the baskets.

•The E1, E2, E3, E4, E8, E9 alarms provoke the “forcing” to end cycle of the running program.

•The E5, E6 alarms interrupts the running program once the cause is resolved, it will bring bach the execution of the program.

•The alarm E7 is visualized at the end of the cycle that comes, however, brought to the end since the operation of the dishwasher is not harmed.

To “reset” an alarm is necessary:

•Open and close the door, or turn off and on the machine. At this point is possible to program the dishwasher again.

If the malfunction persists, contact your authorised Service Centre.

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height

597 ⎟ 599 mm

Free standing: 600 mm

Fully integrated: 570 mm

Free standing from 850 mm to 870 mm Fully integrated from 820 mm to 870 mm

Capacity

 

12 Standard place settings

 

 

 

Water supply pressure

 

min. 50 – max. 900 KPa (min. 0.5 – max. 9 bar)

 

 

 

Electrical characteristics

 

See rating plate

46

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Dishwasher Contents Safety and operating instructions Safety instructionsAquastop Models Connecting to the Water Supply Installation and hook-upWater supply connection Drain Connection Electrical connectionUpper panel Description of the controlsInformation display Delaying the Program Switching OFFAnnulling the Program in Progress Modifying the ProgramTable of Programs HALF-LOAD Function certain models only Washing programsSliding Facing Panel for fully integrated models only Removing the DishesMoving the Facing Panel Adjusting the Water Softening System Using the water softening systemOperating instructions Setting Water Hardness Regeneration Electronic SettingSwitch Setting Performed every cycleWater Hardness Table Setting Using the rinse aid and detergent dispensersAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent User instructions General warnings and recommendations Lower Basket Using the basketsLoading the Lower Basket Loading examplesKnife blades do not protrude from the basket Cutlery BasketUpper Basket Loading the Upper BasketPull-out version Adjusting the Upper BasketPush-button version Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Cleaning the Orbital Version Spray ARMProlonged Disuse Cleaning the Filter UnitTroubleshooting Minor Problems Fault Troubleshooting598 Vorrichtung für die Einstellung der Spannung der Türfedem

CSE66-I2, CSE66-I specifications

The Smeg CSE66-I and CSE66-I2 are exceptional built-in coffee machines that cater to coffee aficionados and culinary enthusiasts alike. Crafted with a unique blend of Italian design and advanced technology, these machines elevate the coffee-making experience at home.

One of the standout features of both models is their innovative brewing system, which ensures that every cup delivers the perfect balance of flavor and aroma. The machines utilize a high-performance heating system that quickly reaches optimal temperatures, guaranteeing that each extraction is consistent and optimal. This is complemented by the manual frothing system, which allows users to create velvety microfoam for cappuccinos and lattes, giving them the versatility to craft café-quality drinks.

Both models are designed with user convenience in mind. The intuitive touch control display makes navigating through the various functions and settings effortless, while the customizable drink options allow coffee lovers to personalize their beverages according to taste preferences. Users can easily select strength, volume, and temperature, tailoring each brew to their liking.

The Smeg CSE66-I and CSE66-I2 are also equipped with a dual coffee brew function, allowing users to prepare two coffee cups simultaneously, enhancing efficiency during busy mornings or when entertaining guests. The machines feature a built-in grinder, made of stainless steel, ensuring that beans are ground freshly for each cup, preserving the essential oils and maximizing flavor extraction.

In terms of design, both models sport a retro aesthetic that seamlessly integrates into modern and traditional kitchens alike. The sleek stainless-steel finish not only adds to the visual appeal but also ensures durability, while the compact size allows for easy installation in smaller spaces.

Another key characteristic of the Smeg coffee machines is their maintenance features. Both models come with a self-cleaning cycle and a removable brew unit, making regular cleaning hassle-free. Additionally, they are designed to use water filters that enhance the taste of coffee while protecting the machine from limescale buildup.

In summary, the Smeg CSE66-I and CSE66-I2 coffee machines combine elegant design with cutting-edge technology to create an unparalleled brewing experience. With features like customizable settings, dual brewing capabilities, and easy maintenance, these machines are perfect for anyone who is serious about their coffee.
Top Page Image Contents