Smeg PV1SR, PV1SM, PV1SL manual Safety Precautions

Page 4

Safety Precautions

3. SAFETY PRECAUTIONS

ELECTRICAL CONNECTION: SEE INSTALLATION INSTRUCTIONS FOR SAFETY REGULATIONS PERTAINING TO ELECTRICAL APPLIANCES. IN THE INTERESTS OF SAFETY, THE LAW REQUIRES THAT INSTALLATION AND MAINTAINANCE OF ELECTRICAL APPLIANCES BE CARRIED OUT BY COMPETENT PERSONS IN ACCORDANCE WITH CURRENT REGULATIONS. OUR RECOGNIZED INSTALLERS PROVIDE A GUARANTEE OF GOOD WORKMANSHIP. ELECTRICAL APPLIANCES MUST ONLY BE DISMANTLED BY A QUALIFIED ELECTRICIAN.

THE PLUG TO BE CONNECTED TO THE POWER SUPPLY CABLE AND THE SOCKET MUST BE OF THE SAME TYPE AND MUST CONFORM TO CURRENT REGULATIONS.

THE POWER SOCKET MUST BE ACCESSIBLE AFTER THE APPLIANCE HAS POSITIONED.

NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER SUPPLY CABLE.

THIS APPLIANCE MUST NOT BE INSTALLED ON TOP OF OTHER APPLIANCES, BUT ON A WORKTOP.

REGULATIONS REQUIRE THAT THE APPLIANCE IS EARTHED IN ACCORDANCE WITH ELECTRICAL SAFETY REGULATIONS.

ALWAYS CHECK THAT THE CONTROL KNOBS ARE TURNED TO 0 (OFF) WHEN YOU HAVE FINISHED USING THE APPLIANCE.

IMMEDIATELY AFTER INSTALLATION, CARRY OUT A BRIEF INSPECTION TEST OF THE APPLIANCE, FOLLOWING THE INSTRUCTIONS BELOW. SHOULD THE APPLIANCE NOT FUNCTION, DISCONNECT IT FROM THE POWER SUPPLY AND CONTACT YOUR NEAREST AFTER-SALES ASSISTANCE CENTRE.

NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.

DURING USE, THE GLASS CERAMIC HOTPLATE BECOMES VERY HOT. MAKE SURE YOU NEVER TOUCH IT WITH YOUR HANDS.

EVEN WHEN VERY HOT, THE GLASS CERAMIC HOTPLATES MAY NOT SEEM HOT, THEREFORE BE VERY CAREFUL WHENEVER TOUCHING THEM WITH BARE HANDS.

THE APPLIANCE IS DESIGNED FOR PROFESSIONAL USE BY TRAINED PERSONNEL. DO NOT ALLOW CHILDREN TO GO NEAR OR PLAY WITH THE APPLIANCE.

NEVER, UNDER ANY CIRCUMSTANCES, PLACE ALUMINIUM FOIL OR PLASTIC CONTAINERS ON THE HOTPLATE.

NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. ALL REPAIRS MUST BE CARRIED OUT BY AN AUTHORIZED TECHNICIAN OR AN AUTHORIZED AFTER-SALES SERVICE CENTRE. IN THE EVENT OF MALFUNCTION, DISCONNECT THE APPLIANCE FROM THE POWER SUPPLY.

IF YOU NOTICE ANY CRACKS OR DAMAGE TO THE SURFACE OF THE GLASS CERAMIC HOTPLATE, IMMEDIATELY DISCONNECT THE APPLIANCE FROM THE POWER SUPPLY AND CONTACT AN AUTHORIZED AFTER-SALES SERVICE CENTRE.

WHEN DISPOSING OF THE APPLIANCE, TAKE IT TO A COLLECTION CENTRE FOR RECYCLABLE WASTE.

The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from non-observance of the above prescriptions or from tampering with any part of the appliance or for the use of non-original spare parts.

15

Image 4
Contents Summary Precautions for USE Manufacturer Declines ALL Liability for Improper USETips for SCRAPPING- Safeguarding the Environment Safety Precautions Prescribed USE of the Appliance Before InstallationKnow Your Appliance Description of Controls Thermostat KnobCare and Maintenance Technical specifications data plate Installing the ApplianceElectrical connection Positioning the hotplate Overall dimensionsLevelling the hotplate