Smeg BQ6030 Adjusting the Primary AIR Flows, Adjusting the Primary AIR Flow for U- Shaped Burners

Instructions for the Installer

ADJUSTING THE PRIMARY AIR FLOWS

The operations below must be carried out for every burner in the barbecue section:

ADJUSTING THE PRIMARY AIR FLOW FOR "U"- SHAPED BURNERS

1 Undo the adjuster screw A of the air regulator

A

sleeve.X

2Turn the regulator sleeve B into the position for the type of gas to be used, consulting the table below.

3Tighten the regulator screw, making sure that the distance X is correct (see table below).

ADJUSTING THE PRIMARY AIR FLOW FOR "PARALLEL FLAME" BURNERS

1Undo the adjuster screw A of the air regulator sleeve.

2Pull the regulator sleeve B out or push it in to achieve the position for the type of gas to be used, consulting the table below.

3Tighten the regulator screw, making sure that the X

distance X is correct (see table below).

A

B

B

NATURAL GAS

(N)U-shaped burners

G30/G31 (LPG)	NATURAL GAS (N)
U-shaped	Parallel flame
burners	burners

G30/G31 (LPG) Parallel flame burners

X =

4 mm

8 mm

2 mm

8 mm

13