Instructions for the Installer
CONVERSION INSTRUCTIONS
THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE APPLIANCE'S LIFE CYCLE.
INSTALLATION MUST BE CARRIED OUT BY QUALIFIED STAFF IN COMPLIANCE WITH THE RELEVANT REGULATIONS. THE MANUFACTURER DECLINES ALL LIABILITY FOR IMPROPER USES OTHER THAN THOSE STATED ABOVE.
This kit, for separate sale, has been specially designed to convert the barbecue from LPG to NATURAL GAS.
It contains all the components and instructions necessary for the conversion procedure.
The appliance is set in the factory to operate on LPG. The conversion procedure (requiring the kit described below) involves replacement of all the burner nozzles, adjustment of the primary air flow of the barbecue section burners only, and adjustment of the minimum flame setting on the gas taps.
On completion of these operations, replace the “regulated for gas” label on the rear of the barbecue with the one supplied in the kit.
The installation work must be carried out by a skilled technician.
WARNING: Keep all the nozzles
When converting back to LPG the conversion procedure is exactly the same as that described below for NATURAL GAS.
CONTENTS OF THE KIT
The contents of the natural gas conversion kit are listed below:
•NATURAL GAS NOZZLES.
•5/8" TO 1/2" GAS MALE UNION.
•SEAL.
•"REGULATED FOR" LABEL (TO BE APPLIED AFTER CONVERSION).
9