GB
Cleaning and maintenance
Cleaning
Before cleaning, disconnect the power sup- ply and remove all loose fittings.
The cabinet is best cleaned using warm water (max. 65 °C) with a little mild,
The sealing strip around the lid must be cleaned regularly to prevent discolouration and prolong service life. Use clean water. After cleaning the sealing strip, check that it continues to provide a tight seal.
The ventilation grille must be kept free of dust and dirt. Clean it with a vacuum cleaner.
If the appliance is not to be used for any length of time, switch it off, disconnect the power supply, empty it, clean the cabinet and leave the lid open to allow air circula- tion and prevent smells.
Replacing the bulb
1.Disconnect the power supply by pulling the plug out of the socket.
2 . Remove the lamp cover by pressing its upper edge downwards to release it from the two clips (fig. 7).
3.Replace the bulb(s).
4.Refit the cover and reconnect the power supply.
max. 15 W
fig. 7
Advise for minimising the energy consumption
●●The lower ambient temperature the lower energy consumption.
●●The lower temperature inside the unit the higher energy consumption.
●●Recommended temperature
●●Defrost when the ice
●●Do not open the lid more than necessary.
●●Cool hot food and beverages before plac- ing them in the freezer.
●●Thaw frozen items in a refrigerator.
●●Place frozen items in a refrigerator while defrosting the freezer.
10