Smeg CH300, CH400, CH500 manual Installation and start-up, Placement, Room temperature, Ventilation

Page 5

Installation and start-up

Placement

For safety and operational reasons, the ap- pliance must not be installed outdoors.

The appliance should be placed on a stable, level surface in a dry, well-ventilated room (max. 75% relative air humidity).

Never place the appliance close to sources of heat such as cookers or radiators, and avoid placing it in direct sunlight.

Room temperature

The climate class is stated on the name- plate (see page 12). This specifies the optimum room temperature.

Climate

Optimum room

class

temperature

SN

+10 ºC à +32 ºC

N

+16 ºC à +32 ºC

ST

+18 ºC à +38 ºC

T

+18 ºC à +43 ºC

If the room temperature is sub zero, the ap- pliance will not function correctly.

Ventilation

It is important that the appliance be well ventilated and that air can circulate unhin- dered above, below and around it. Figure 2 illustrates how the necessary air circulation can be ensured.

GB

800 mm

100

mm

 

 

 

 

 

100

mm

 

 

 

 

 

 

 

 

 

20

mm

 

 

 

fig. 2

 

 

 

 

 

There must be at least 15 mm clearance between the base of the appliance and the floor.

IMPORTANT! There must be free access to the ventilation grille (fig. 3).

fig. 3

5

Image 5
Contents CH300, CH400, CH500 Page Contents Get to know your chest freezer Placement Installation and start-upRoom temperature Climate Optimum room Class TemperatureElectrical connection Technical dataOperation and function Freezer UseFreezing ThawingDefrosting Cleaning Cleaning and maintenanceAdvise for minimising the energy consumption Replacing the bulbFault Possible cause Remedy Fault findingSpare parts Warranty, spare parts and serviceWarranty disclaimer For business users in the Euro- pean Union Disposal