HOB TOP Control Knob

Instructions for the user

To set cooking time turn the knob clockwise. The numbers from 5 to 90 correspond to minutes. Adjustment is progressive and intermediate positions between the numbers shown may be used.

At the end of programmed cooking, an audible alarm sounds which goes off automatically after 4-5 seconds.

Used to control the temperature on the hob. Rotate clockwise to set to desired value (2 to 12).

HOB CONTROL KNOB

WITH DUAL ZONES

Used to select heating zone in plates with dual heating zones.

Rotating the knob clockwise from between 2 to 12 heats the inner zone within the small diameter.

Setting knob to or and releasing it (knob returns to 12) causes both zones to be heated. To adjust heat intensity, turn the knob anticlockwise to the desired value.

To return to heating inside the inner zone only, set knob first to 0 and then to any value between 2 and 12 as desired.

IMPORTANT

(in models with flush controls only)

To access to the control knobs simply press them and they will spring out into the operating position (fig. A). They must remain out in this position while the oven is in operation to prevent them from overheating. To return them to the retrected position, simply press down until the catch engages.

To open the oven door, press the handle and it will spring out into the operating position (fig. B). It must remain in this position while the oven is in operation to prevent it from overheating.