Smeg ALFA201XE Using the Oven, Precautions and General Advice, Inside lights, Setting the time

Instructions for the User

4.USING THE OVEN

4.1Precautions and General Advice

When the oven is used for the first time, it should be heated to 200°C for long enough to burn off any oily residues left by the manufacturing process.

If you have to carry out any procedures on foods, leave the door open for as short a time as possible to ensure the temperature inside the oven does not drop far enough to impair cooking results.

To avoid unpleasant contact with any steam inside the oven, open the door in two stages: hold it half-open (about 5 cm) for 4-5 seconds, then open it completely.

4.2 Inside lights

The inside lights are turned on by turning the thermostat knob.

4.3Preheating

When the oven is cold, set a preheating temperature of no more than 200°C. Once the set temperature is reached, wait a few minutes after the buzzer sounds or after the pilot light goes out before starting cooking processes.

4.4 Setting the time

At first use, or after a power failure, the time must be set. The display will

show a flashing icon .

To set the current time, hold down START + STOP together until the display stops flashing.

Now press START to increment the hour display. Once the current hour has been set, press STOP to set the minutes and increment them as before by pressing the START button.

When the correct time is set, press the STOP button and the display will stop flashing.

4.5 Setting the power

After having set the time as described above and pressed the STOP button to confirm the setting, the display will show P8.3 (maximum power absorption 8.3 kW) if the oven is connected to a three-phase power supply, or P5.5 (maximum power absorption 5.5 kW) if the power supply is single-phase.

Press START repeatedly to scroll through the power absorption settings available:

P8.3, P5.5 or P3.0 for three-phase power connection;

26