Smeg CR325ANF manual Replacing the Light Bulb

Page 17

REPLACING THE LIGHT BULB

Always disconnect the appliance from the power supply before replacing the lamp. The lamp might be in two different positions, depending on the model.

1.Loosen the screw and remove the diffuser.

2.The lamp has a bayonet mount. It CANNOT BE UNSCREWED: it should be pulled as shown by the arrow. Replace the light bulb with one with equal power or a power not higher than the maximum limit indicated by the side of light bulb holder (only available from the Customer Care Centre).

3.Replace the diffuser and wait 5 minutes, before reconnecting the appliance.

Printed in Italy 04/08

D GB F NL E P I GR S N DK FIN 5019 608 01035

Image 17

Contents Instructions for USE Packing Before Using the ApplianceScrapping/Disposal InformationAmb. T. C Amb. T. F Precautions and General RecommendationsControl panel lock Switching off the appliance refrigerator and freezerVacation Option Switching the appliance on and temperature adjustment Using the Refrigerator CompartmentTemperature adjustment Storing food in the refrigerator compartmentRefrigerator compartment alarms Using the RefrigeratorSwitching the refrigerator off Vacation 4-8 Removing the baskets Using the FreezerPower failure alarm Making ice cubes Maintenance and Cleaning Fan Maintenance and Cleaning continuationBefore contacting the Customer Care Centre… When you hear these noises Your appliance is aliveSome operation noises can be reduced by Some possible operation noisesInside light does not work Temperature inside the compartments is not cold enoughAppliance does not work and the displays are off Before contacting the Customer Care Centre Fuse replacement For the Republic of Ireland only Socket outlet / plug valid for both countriesFreezer compartment Product SheetControl Panel Lock Control PanelReplacing the Light Bulb