Whynter DWR-401DS manual BUILT-IN Cabinet Instructions, BWR-171DS BWR-401DS, Electrical Connection

Page 8

Installation

BUILT-IN CABINET INSTRUCTIONS

These appliances are designed for both built-in or free standing installation. For built-in installation, ensure proper service access and ventilation, allow at least ¼” (6.35mm) space on each side and at the top.

CABINET OPENING DIMENSIONS (minimum)

Width

Depth

Height

BWR-171DS

BWR-401DS

12¼”

24”

23” + 2” handle

23” + 2” handle

32½”

32½”

 

 

ELECTRICAL CONNECTION

WARNING: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified electrician or contact Whynter Service Department

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent over- loading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CUL- Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

INSTALLING STAINLESS STEEL HANDLES

This appliance includes stainless steel handles that are not required to operate this appliance. To install the handles please follow the below instructions:

1.The gaskets are easily displaced by hand, no tools are necessary.

2.Use a flat-head screwdriver to remove the two pre- installed decorative plugs from the back of doors. Some wine refrigerators have no decorative plugs.

3.Install the handles tightly as shown with two screws, lock washers and flat washers provided. (DO NOT over tighten as this will cause damage to the handles and stainless steel door frames).

4.Replace the door gaskets to its original position.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents BWR-171DSBWR-401DS Table of Contents Appliance Safety Safety PrecautionsSafety Precautions Parts Product Features Technical Data ModelInstallation of Your Appliance InstallationBefore Using Your Appliance Installing Stainless Steel Handles BUILT-IN Cabinet InstructionsBWR-171DS BWR-401DS Electrical ConnectionReversing the Door Swing of Your Wine Refrigerator Operation and Controls Setting the Temperature Control Temperature Memory FunctionDoor Alarm Temperature AlarmSabbath Mode Cabinet ShelvesNormal Sounds Defrosting and VentilationStorage Storage Removing ShelvesCare and Maintenance Troubleshooting Problem Possible Causes SolutionsTroubleshooting ONE Year Limited Warranty

BWR-171DS, DWR-401DS specifications

Whynter is a well-known brand in the realm of refrigerators and wine coolers, recognized for its commitment to quality and innovative designs. Two standout models in its collection are the Whynter DWR-401DS and BWR-171DS. Each of these wine cooling units combines efficiency with functionality, tailored for wine enthusiasts who appreciate both style and performance.

The Whynter DWR-401DS is a dual-zone wine refrigerator, featuring a capacity to hold up to 40 standard wine bottles. Its dual-zone capabilities allow for separate temperature control in each compartment, making it the perfect choice for storing both red and white wines at their optimal temperatures. This model is equipped with an adjustable temperature range of 40°F to 65°F, ensuring that all your wine, from robust reds to delicate whites, is preserved in ideal conditions. The DWR-401DS also comes with stainless steel trimmed glass doors, adding an element of sophistication to any space while providing UV protection to prevent light damage to the wine.

On the other hand, the Whynter BWR-171DS is a more compact option, holding up to 17 bottles. It is designed with a single zone cooling system, which is perfect for those who primarily store one type of wine or require a smaller storage solution. The adjustable temperature control allows users to set their preferred temperature within a range of 40°F to 65°F. The BWR-171DS features a sleek design with a stainless steel frame and glass door, ensuring a modern look that complements any décor.

Both models utilize advanced cooling technology, incorporating a fan-forced cooling system that provides even temperature distribution and reduces noise levels. Additionally, these wine coolers are designed with a solid wood shelving system, which safely cradles each bottle while preventing unnecessary vibrations that can disturb the wine.

In terms of energy efficiency, Whynter wine coolers operate quietly and effectively, making them a great choice for home use without causing disruption. The combination of their stylish designs and robust performance characteristics makes the Whynter DWR-401DS and BWR-171DS ideal selections for wine collectors and casual drinkers alike. Whether you need a spacious dual-zone or a compact single-zone solution, Whynter offers quality options that enhance your wine storage experience.
Top Page Image Contents