BUILT-IN Cabinet Instructions, Extension Cord

BUILT-IN CABINET INSTRUCTIONS

These appliances are designed for both built-in and free standing installation.

For built-in installation, ensure proper service access and ventilation, allow at least ¼” (6.35mm) space on each side and at the top.

Cabinet Opening Dimensions (min.)

	BWR-281DZ	BWR-461DZ
Width	15.5”	24.5”
Depth	23.5” + 2” handle	24.5” + 2” handle
Height	34.5”	34.5”

ELECTRICAL CONNECTION

WARNING

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified electrician or an authorized service center.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

INSTALLING STAINLESS STEEL HANDLES

This appliance includes stainless steel handles that are not required to operate this appliance. To install the handles please follow the below instructions:

1.The gaskets(#1) are easily displaced by hand, no tools are necessary.

2.Use a flat-head screwdriver to remove the two pre-installed decorative plugs from the back of doors. Note: Some wine refrigerators have no decorative plugs.

3.Install the handle(#4) tightly as shown with two screws(#3) and flat washers(#2) provided. (DO NOT over tighten as this will cause damage to the handles and stainless steel door frame(#5).

4.Replace the door gaskets to its original position.

Page 8

BWR-461DZ, BWR-281DZ specifications

The Whynter BWR-281DZ and BWR-461DZ are renowned dual-zone wine refrigerators that cater to the needs of wine enthusiasts and collectors alike. Designed for optimal cooling and storage, these models offer cutting-edge features and technologies that enhance the wine preservation experience.

The Whynter BWR-281DZ boasts a 28-bottle capacity, whereas the BWR-461DZ can hold up to 46 bottles, making both models ideal for those looking to store substantial wine collections at home. The dual-zone functionality of these refrigerators allows for the top and bottom compartments to be set at different temperatures, catering to the varying storage requirements of red and white wines. This temperature flexibility ensures that each wine type is stored at its optimal temperature for preservation and enjoyment.

Both models feature a sleek stainless steel frame and a dual-paned tempered glass door that provides insulation while showcasing the wine collection. The reversible door allows for installation flexibility, accommodating various kitchen or entertainment space layouts. The wooden shelves offer a stylish touch and are designed to cradle wine bottles securely, reducing vibrations that could disrupt the aging process.

Whynter incorporates advanced cooling technology in these refrigerators. They utilize a compressor cooling system, ensuring accurate temperature control and consistency. The precise digital thermostat with an easy-to-read LED display allows users to monitor and adjust the internal temperature without hassle. This feature is particularly beneficial for wine collectors who prioritize maintaining specific temperature ranges.

Noise reduction is another hallmark of the Whynter BWR models. The compressor is engineered for quiet operation, making it suitable for both home and commercial environments without disturbing the ambiance. Additionally, the refrigerators are equipped with built-in carbon filters to effectively reduce odors that could affect the wine.

In summary, the Whynter BWR-281DZ and BWR-461DZ wine refrigerators are exceptional choices for wine lovers looking to optimize their storage needs. With dual-zone temperature control, stylish design, lasting durability, and advanced cooling technology, these models stand out in the market. Whether you are an occasional drinker or a serious collector, Whynter's expertise in wine preservation ensures that your wines are stored in ideal conditions, ready to be enjoyed at their best.