Reversing The Door Position

Caution: To avoid injury to yourself and/or property, we recommend someone assist you during the door reversal process.

1.To access the lower hinge assembly, tilt back the refrigerator cabinet or lay the refrigerator on its back

2.Remove both legs located at the front of the cabinet: adjustable left on hinge side and fixed leg on opposite side.

3.Remove the screws holding the lower hinge assembly to the cabinet

4.Remove the main door assembly from the refrigerator cabinet by opening the door and pulling down.

5.Remove the screws from the middle hinge assembly. Then remove the hinge and freezer door.

6.Remove the top cover, hinge, and screws

7.Re-install the top hinge pin on the opposite side of the cabinet

8.Remove the door plugs and door bushing located on the top and bottom of each door assembly

9.Interchange positions of plugs and bushings on both doors

10.Re-install door assembly on cabinet

11.Re-install the middle hinge assembly on the opposite side

12.Make sure the door assembly is properly aligned on the cabinet, before tightening hinge screws

13.Re-install the main door assembly on cabinet

14.Re-install the lower hinge assembly on the opposite side

15.Make sure to change bushing and screw on opposite sides on bottom of unit

16.Make sure the door assembly is properly aligned on the cabinet, before tightening lower hinge screws

17.Re-install both legs (reversed from the original positions: adjustable leg on hinge and fixed leg on opposite side.)