Movement and Installation Instructions

Because this unit is compressor based appliance, ample space is required around the unit to allow it to exhaust properly.

Proper Location

∙ Position your portable freezer in a location where there is proper air circulation and electrical connections.

∙ Keep the portable freezer away from heat and direct sunlight if possible.

∙ This portable freezer is suitable for vehicle use and camping however, the appliance should never be exposed to rain.

∙This portable freezer should not be placed in a built-in or recessed area. It is designed to be freestanding.

∙The normal operation of the freezer depends on heat radiation from the condenser. For the initial use, remove all packaging and allow at least 6” of clearance around the perimeter of the freezer.

Movement and Installation Instructions

1.Remove all interior and exterior packaging.

2.Position the freezer in a dry and well-ventilated place. Keep the freezer away from direct sunlight, heaters and corrosive gases/chemicals.

3.Clean the interior surface with lukewarm water and a soft cloth.

4.When inserting the AC power-cord into the power socket, make sure the power socket is a grounded 115V~AC / 60Hz socket. Also, make sure that the unit’s grounding prong has not being tampered with.

Note: When inserting the DC power-cord, make sure the input is a 12V~DC / 24V power source.

5.When moving the freezer, always use both handles to the carry the unit as level as possible. This is in order to protect the compressor and the sealed system.