Philips SBC RU 880 manual See . ‘Installation’, For instance, For TV FastText For VCR

English

Instructions for use English

INTRODUCTION

You have made a great choice by buying this Philips universal remote control! It replaces up to eight separate remote controls and is pre-programmed to operate with almost any brand of TV, VCR, satellite tuner, cable decoder, CD-player, DVD- player, tuner and amplifier. The SBC RU880 can also control Philips Power Control System devices. It can even learn the codes of other remote control units that are not pre-programmed. Best of all, the SBC RU880 is quick to set up and easy to use, and with the green back-lighting it can even be used in dimly lit rooms! Here's how...

DON'T FORGET THE BATTERIES!

To operate the SBC RU880 you'll need three 1.5V batteries, type UM3, LR6 or AA

only. Put them in like this....

+-

+

+ +

Remember to replace the batteries at least once a year. The RU880 has the unique feature of not losing the programmed or learned codes when the batteries are empty. You only have to set the clock again (see ‘Setting up the Clock’ section).

AT A GLANCE

Once you've installed the batteries, the SBC RU880 is ready to operate most Philips VCRs, satellite tuners, CD-players, tuners and amplifiers. Just press the button (as indicated below) for the Philips device you wish to operate. If you want to operate other equipment brands you need to set up the SBC RU880 first

-see chapter 2. ‘Installation’.

Select TV, VCR, SAT, DVD, CD, AUDIO 1, AUDIO 2 or HOME.

The remote has 8 operating modes: TV, VCR, satellite tuner (SAT/CBL), DVD- player, CD-player, AUDIO 1 & AUDIO 2 (for other equipment) and HOME (for operating the Philips Power Control System). The LCD display shows you which mode you have activated. To switch between modes simply press the button of the device you want to operate.

1 SMART gives access to the set-up menu of the SBC RU880

2Display

3Mode keys select the device you want to operate

4 MENU	switches menu on (and off, if this is the case on your
	original remote)

5Cursor up/down/

left/right	scrolls through the menu
6 Volume Up/	turns volume up
Volume Down	turns volume down
7 Mute	switches sound on and off
8 Keypad	for direct channel selection and other functions
9 S(hift)	hold this key while pressing other keys to access
	additional functions (if available on your equipment).
For instance:	TV:
	S(hift) –	- /- -	Previous Program
	S(hift) –	Menu	Menu Off
	S(hift) –	a	Teletext Mix
	S(hift) –	I	Teletext Cancel
	Try these and other combinations on your equipment to
	discover which functions are available.
0	for TV FastText		for VCR
	red		G	Rewind
	green		L	Stop
	yellow		B	Play
	blue		F	Forward
	white		K	Pause
			M	Record
! I	switches Teletext off

aswitches Teletext on

henlarges the Teletext display

dkeeps the current Teletext page on screen

4