Philips SBC RU 880 manual Extra Functions, Delete Timer

7Press the SMART key to indicate the end of the string.

– The LCD displays OK for a second and then returns to normal operation.

NOTES:

–Press the keys in the sequence that you want your equipment to respond.

–The THEATRE key, SMART key and back-lighting key cannot be programmed as macro keys.

4.EXTRA FUNCTIONS

4.1 TIMER

The SBC RU880 has a built-in timer that can be used to organise time blocks to switch on or off your TV or to set up your VCR for recording. This timer can also be used to operate a Philips Power Control system.

If you want to set up the timer for example to record your favourite programme every Monday at 7.p.m., just:

1Press the SMART key (for about three seconds) until the LCD displays

TIMER.

2Press OK.

– The LCD displays ADD TIMER, and the SBC RU880 is now in timer set-up mode.

3Press OK.

– The LCD displays ONCE.

4Press Cursor up or Cursor down to choose between ONCE, DAILY and WEEKLY (Select WEEKLY in this case).

5Press OK.

– The LCD displays START : .

6Key in the time using four digits (choose 19:00 in this case). Press Cursor left or Cursor right to go back and forth to correct.

7Press OK.

– If you have chosen Once or Weekly, the LCD displays MON.

8Press Cursor up or Cursor down to choose one of the week-days (Monday in this case).

9Press OK.

–The LCD displays ENTER KEYS. You can now enter the sequence of keys you want to transmit at a certain point in time e.g. VCR, B, Digit (2), REC.

0Press the SMART key to indicate the end of this macro.

–The LCD displays OK for a second and then returns to normal operation. The timer symbol should light up.

That’s it! You have now programmed your VCR to record your favourite Channel 2 programme at 7.p.m. every Monday night.

NOTES:

–If you have chosen the AM/PM clock, the LCD displays PM.

•Press Cursor up or Cursor down to choose between AM and PM.

•Press the SMART key to leave this mode and go back to normal mode.

–As soon as the last timer-block is transmitted, the timer-symbol should go off.

–Total number of timers and macro's should not exceed 8. Maximum number of keys per macro should be 10.

4.2 DELETE TIMER

To delete the timer function:

1Press the SMART key (for about three seconds) until the LCD displays

TIMER.

2Press OK.

–The LCD displays ADD TIMER and the SBC RU880 is now in timer set-up mode.

3Press Cursor up or Cursor down until the LCD displays DEL TIMER.

4 Press OK.

– The LCD displays (DAY) (Once/Weekly) (TIME) or (DAILY) (TIME). (This means day and time of the first programmed timer-block).

5 Press Cursor up or Cursor down to select between the several programmed timer-blocks.

– The day and time of those timer-blocks will then be displayed. 6 Press OK to delete the chosen timer-block.

– The SBC RU880 returns to normal operating mode.

NOTE: When the last programmed timer-block is deleted the timer-symbol goes off.

English

11