Installation Instructions

¾BEFORE USING YOUR ICE MAKER

•REMOVE THE EXTERIOR AND INTERIOR PACKAGING MATERIAL.

•CHECK TO BE SURE YOU HAVE ALL OF THE FOLLOWING PARTS:

•1 ICE BUCKET

•1 PLASTIC SCOOP

•25 FT. HOSE

•1 INSTRUCTION MANUAL

•BEFORE CONNECTING THE ICE MAKER TO THE POWER SOURCE, LET IT STAND UPRIGHT FOR APPROXIMATELY 4 HOURS. THIS WILL REDUCE THE POSSIBILITY OF A MALFUNCTION IN THE COOLING SYSTEM FROM HANDLING DURING TRANSPORTATION.

•CLEAN THE INTERIOR SURFACE WITH LUKEWARM WATER USING A SOFT CLOTH.

¾INSTALLATION OF YOUR ICE MAKER

•THIS APPLIANCE IS DESIGNED TO BE RECESSED OR BUILT-IN (FULLY RECESSED).

•PLACE YOUR ICE MAKER ON A HARD AND LEVEL FLOOR THAT IS STRONG ENOUGH TO SUPPORT THE ICE MAKER WHEN IT IS FULLY LOADED. REMEMBER THAT THE UNIT WILL BE SIGNIFICANTLY HEAVIER ONCE IT IS FULLY LOADED. TO LEVEL YOUR ICE MAKER, ADJUST THE LEG AT THE FRONT OF THE ICE MAKER.

•PLACE THE ICE MAKER AWAY FROM DIRECT SUNLIGHT AND SOURCES OF HEAT (STOVE, HEATER, RADIATOR, ETC.). DIRECT SUNLIGHT MAY AFFECT THE ACRYLIC COATING AND HEAT SOURCES MAY INCREASE ELECTRICAL CONSUMPTION. EXTREME COLD AMBIENT TEMPERATURES MAY ALSO CAUSE THE ICE MAKER NOT TO PERFORM PROPERLY.

•AVOID LOCATING THE ICE MAKER IN DAMP AND HUMID AREAS. TOO MUCH HUMIDITY IN THE AIR WILL CAUSE FROST TO FORM QUICKLY ON THE EVAPORATOR REQUIRING MORE FREQUENT DEFROSTING OF THE ICE MAKER.

•PLUG THE ICE MAKER INTO AN EXCLUSIVE PROPERLY INSTALLED-GROUNDED WALL OUTLET. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD. ANY QUESTIONS CONCERNING POWER AND OR GROUNDING SHOULD BE DIRECTED TOWARD A QUALIFIED ELECTRICIAN.

¾ELECTRICAL CONNECTION

WARNING

IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, DO NOT ATTEMPT ANY REPAIRS. ORDER A REPLACEMENT FROM YOUR WHYNTER RETAILER AND HAVE A QUALIFIED ELECTRICIAN REPLACE THE POWER CORD

•THIS ICE MAKER SHOULD BE PROPERLY GROUNDED FOR YOUR SAFETY. THE POWER CORD OF THIS ICE MAKER IS EQUIPPED WITH A THREE-PRONG PLUG WHICH IS USED WITH STANDARD THREE PRONG WALL OUTLETS TO MINIMIZE THE POSSIBILITY OF ELECTRICAL MALFUNCTION.

•DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD SUPPLIED.

•DO NOT USE AN EXTENSION CORD TO CONNECT POWER TO THE UNIT.

•NEVER USE A TWO-PRONG GROUNDING ADAPTER.

•WHERE A TWO-PRONG WALL RECEPTACLE IS ENCOUNTERED, CONTACT A QUALIFIED ELECTRICIAN TO HAVE IT REPLACED WITH A 3-PRONG RECEPTACLE IN ACCORDANCE WITH APPLICABLE ELECTRICAL CODES.

•THIS ICE MAKER REQUIRES A STANDARD 115/120 VOLTS A.C.~/60HZ ELECTRICAL OUTLET WITH THREE-PRONG GROUND.

•THE CORD SHOULD BE SECURED BEHIND THE ICE MAKER AND NOT LEFT EXPOSED OR DANGLING TO PREVENT ACCIDENTAL INJURY.

UIM-155 specifications

The Whynter UIM-155 is a compact, high-efficiency ice maker that is designed to deliver a steady supply of ice for both home and commercial use. Measuring 19 inches in width, this unit is ideal for those who desire convenience without sacrificing valuable space in their kitchens, bars, or recreation areas.

One of the standout features of the UIM-155 is its compact size, making it suitable for installation in tight spaces. Despite its small footprint, it has a robust capacity, producing up to 33 pounds of clear, bullet-shaped ice in a 24-hour period. This impressive output ensures that you will always have enough ice on hand for entertaining guests or for daily use.

The UIM-155 is equipped with advanced technology that enhances its efficiency and reliability. The ice maker uses a powerful compressor that not only aids in the rapid production of ice but also ensures that the unit operates quietly. This feature is particularly beneficial for indoor use, where noise levels can be a concern.

In terms of design, the UIM-155 boasts a sleek and modern aesthetic that fits seamlessly into any environment. Its stainless steel exterior is not only stylish but also easy to clean and maintain. The interior features a transparent window, allowing users to monitor ice levels without opening the lid, which helps maintain optimal ice production efficiency.

The UIM-155 also includes an intuitive control panel that allows users to easily adjust settings and monitor the operation of the machine. The unit is equipped with an automatic shut-off feature that activates when the ice bin is full, preventing overflow and ensuring a hassle-free experience.

Energy efficiency is another key characteristic of the UIM-155. This ice maker is designed to consume less power than traditional models, making it an environmentally friendly choice for everyday use.

Overall, the Whynter UIM-155 combines practicality with style, making it a top choice for anyone in need of a reliable and efficient ice-making solution. With its impressive production capacity, compact design, and user-friendly features, it is perfect for parties, everyday use, or for professional settings such as cafes and restaurants. Whether you're cooling drinks or serving cocktails, the UIM-155 ensures that ice is always readily available.