Chapter 2
The PC Express Card Slot
The PC Express card slot can be used as an interface between your computer and a variety of communications devices, such as network adapters, SCSI adapters, fax/modems, or provide additional data storage capacity.
*PLEASE NOTE THAT THIS SLOT DOES NOT SUPPORT PCMCIA CARDS
Installing a Card
8.The top side of a PC card is usually identified with a label. Insert the card into the slot with the label side up and the edge with pinhole contacts going in first.
9.Insert the card into the slot. You will feel some resistance as the card slides into the back of the slot.
Slide the card into the slot.
Push the button to eject the card.
10.PC cards require drivers, or a program that allows the operating system to use a specific device. Many drivers are included with Windows, but if not, you will be prompted to install the driver included with your card.
11.The computer will beep twice to indicate successful installation. A single beep means that there was a problem recognizing the card.
Note: Please read the instructions included with individual PC cards. Some cards may be inserted with power on, while others require that the computer be turned off.
Removing a Card
6.If a card is in use, press the eject button on the card slot to release the button.
7.Press again to release the card.
27
