Installation and Operating Instructions

INSTALLATION OF YOUR ICE MAKER

∙Locate the ice maker away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consump- tion. Extreme cold ambient temperatures may also cause the ice maker not to perform properly.

∙Plug the ice maker into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord.

∙IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.

SPACE REQUIREMENTS

∙During transportation, the incline angle of the cabinet should not be over 45°

∙Do not turn the Ice Maker upside down. Problems could occur in the compressor and sealed system.

∙The Ice maker should be placed horizontally on a properly leveled surface.

∙To ensure proper ventilation for your ice maker, allow 6” of space at the back and on each side.

∙Before using the Ice maker for the first time, please wait 4 hours after positioning it.

∙Clean the ice shovel, ice basket, water reservoir, and ice scoop frequently.

OPERATING INSTRUCTIONS

1.Open the top cover and remove the ice basket.

2.Remove any dust or objects that may be in the water reservoir.

3.Fill the water tank up to the line marked “MAX”. Fill with potable or drinking water only.

4.Select desired ice cube size by pressing the “ice size” selector (Small or Large).

5.Water will be pumped from the water reservoir to the water tray under the freezing bars. The freezing bars will start freezing. Once the freezing process is completed, the freezing bars will heat up to drop the ice cubes. Then the ice shovel will push the ice cubes down to the ice basket.

6.When the unit is used for the first time, discard the first couple batches of ice.

7.The ice-maker will automatically check the water level in the reservoir periodically. The ice maker will detect any shortage of water and will stop the ice-making cycle, the ADD WATER indicator will be lit. Press the POWER button to turn off the unit and fill the reservoir with wa- ter. Press the ON/OFF button again to restart the ice-making cycle or wait 3 minutes after the ADD WATER indicator goes out as the ice maker will begin It’s normal operation cycle auto- matically.

8.When the ice cubes reach the ice full sensor, the ice maker will stop operating and the ICE FULL indicator will be lit.

9.Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If unit is not in use, drain all water left in the tank.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of your ice maker if you minimize the number of times the ice maker cover is opened. If the power is going to be OFF for a longer period of time, you need to take the proper steps to disconnect your appliance.

IMC-270MS specifications

The Whynter IMC-270MS is a versatile and compact ice maker that caters to both home and small business needs. Known for its high efficiency and user-friendly features, this ice maker is an ideal choice for those looking to produce a consistent supply of ice without taking up too much space.

One of the standout features of the IMC-270MS is its ability to produce high-quality, bullet-shaped ice pellets. With a production capability of up to 27 pounds of ice in a 24-hour period, it can keep up with the demands of parties, gatherings, or daily use. The machine has a water reservoir capacity of 2.3 liters, allowing for longer operating times without frequent refilling, which is particularly useful for busy environments.

The IMC-270MS employs advanced ice-making technology, including a compressor cooling system that ensures optimal temperature control. This feature helps to reduce cycle time and increases ice production efficiency, while also maintaining energy consumption to a minimum. The eco-friendly design is complemented by its use of natural refrigerants, aligning with modern sustainability practices.

User convenience is another focus of the Whynter IMC-270MS. The machine is designed with a prominent LED indicator that alerts users when the ice bin is full or when the water reservoir needs to be refilled. This smart notification feature ensures smooth operation without constant supervision. The control panel is intuitive, making it easy for anyone to operate, regardless of technical skills.

Regarding construction, the IMC-270MS boasts a durable stainless steel exterior that is not only sleek and modern but also resistant to rust and corrosion. Its compact design, measuring 14.25 inches wide, 17.5 inches deep, and 29 inches high, allows it to fit easily on countertops or tucked away in cabinets.

Maintenance is straightforward with the IMC-270MS, as it includes a removable ice bin and water reservoir for easy cleaning. Additionally, it operates quietly, making it suitable for both home and office environments without disturbing the peace.

In summary, the Whynter IMC-270MS is a reliable ice maker that combines efficiency, functionality, and aesthetic appeal. Whether for personal use or for entertaining guests, it offers a dependable solution for producing high-quality ice swiftly and effortlessly. With its advanced features, compact design, and user-friendly operation, it stands out in the competitive ice maker market.