Installation Instructions, Unpacking

Felix Storch, Inc.

SUMMIT PROFESSIONAL DIV.

INSTALLATION INSTRUCTIONS

Page 3

UNPACKING

Excessive Weight Hazard! * Use two or more people to move and install your appliance. Failure to do so can result in back or other injury.

ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS BEFORE TURNING ON, TO ALLOW THE COMPRESSOR LUBRICANT TO DRAIN.

1. Remove Packaging Materials

2.Remove tape and glue residue from surfaces before turning on the appliance. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry.

3.Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your appliance.

4.When Moving Your Appliance:

Your appliance is heavy. When moving the appliance for cleaning or service, be sure to protect the floor. Always pull the appliance straight out when moving it. Do not wiggle or “walk” the appliance when trying to move it, because floor damage can occur.

5. Clean Before Using

After you remove all of the packaging materials, clean the inside of your appliance before using it. See the cleaning instructions in “Appliance Care.”

6.All upright models have level legs in the front and many also have them in the rear. Level as necessary for best operation.

7.If your appliance has casters, after moving into place, lock the brakes on those casters supplied with brakes. Always unlock before moving the appliance for cleaning.

Keep flammable materials and vapors, such as gasoline, away from appliances. Failure to do so can result in explosion, or fire.

LOCATION REQUIREMENTS

IMPORTANT: Do not install the appliance near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 45°F (7°C). Do not place in direct sunlight.

Check the strength of the floor before installing your appliance. It should hold the weight of a fully loaded appliance. Allow at least 1” (2.5 cm) of airspace at the top and on both sides of the appliance and 1” (2.5 cm) between the back of the appliance and the wall. If the appliance is going to be placed against a wall, if possible, leave extra space on the hinge side so the door can open wider than its width (to make it easier to remove shelves or storage bins).

NOTE: This appliance may be installed side by side with another appliance. Allow for a 3’’ (7.5 cm) clearance at the top and sides, and a ¼” (0.64 cm) clearance between the appliances.

IF YOUR MODEL HAS THE LETTERS “BI” IN THE MODEL NUMBER OR SUFFIX, OR BEGINS WITH “ALB”, IT IS DESIGNED FOR BUILT IN USE, AND DOES NOT REQUIRE CLEARANCE EXCEPT IN THE BACK. BE SURE THAT YOU DO NOT BLOCK THE AIRFLOW UNDER THE APPLIANCE .

SPR7OS specifications

The Summit SPR7OS is an advanced outdoor rugged tablet designed specifically for professionals who require a reliable and durable device in challenging environments. Featuring an impressive blend of robust construction, cutting-edge technology, and user-friendly functionality, the SPR7OS has become a go-to solution for various industries, including construction, field service, logistics, and emergency services.

One of the standout characteristics of the SPR7OS is its ruggedness. Built to withstand harsh conditions, the device meets IP68 standards for water and dust resistance, ensuring that it can operate effectively even in extreme weather. Additionally, it is certified to military standards (MIL-STD-810G), meaning it can endure drops, shocks, and vibrations, making it suitable for demanding field applications.

The SPR7OS sports a 7-inch sunlight-readable display that offers high-definition resolution. This feature ensures that users can view vital information clearly, even in bright outdoor conditions. The touchscreen is glove-compatible, allowing for seamless interaction without the need to remove protective gear, which is crucial for field personnel.

Powered by a robust processor and ample RAM, the SPR7OS delivers fast performance and efficient multitasking capabilities. This means users can run various applications simultaneously without lag, enhancing productivity during critical tasks. The operating system is built on a versatile platform, typically running Windows or Android, providing flexibility in app support and integration with existing systems in various industries.

Connectivity is another significant advantage of the Summit SPR7OS. It supports 4G LTE cellular connectivity, Wi-Fi, and Bluetooth, allowing field workers to stay connected and access real-time data wherever they are. The inclusion of GPS functionality also aids in navigation and tracking, essential for logistics and emergency response applications.

Battery life is a key consideration for any outdoor device, and the SPR7OS does not disappoint. It features a high-capacity battery designed to last through long work shifts, ensuring that users can rely on the tablet throughout the day without the need for frequent recharging.

In summary, the Summit SPR7OS is a powerful tool engineered for resilience and efficiency in demanding settings. Its combination of ruggedness, advanced technology, and practical features makes it an essential device for professionals across various sectors. With its capacity to endure tough conditions while providing seamless functionality, the SPR7OS stands out in the market of rugged tablets, making it a trusted partner in the field.