Care, cleaning & maintenance Cleaning the Unit

2)Using the ON/OFF switch (1) at the side of the unit, switch the power ON. The POWER light (8) on the top of the unit will illuminate red.

3)Press the START button (2) at the top of the unit. The water level will be automatically checked and, if correctly filled, the red light will turn green. If the water level is still incorrect after 50 seconds, the LOW WATER light (9) will flash in orange and the POWER light (8) will flash in red. The unit will then switch to standby mode until the reservoir is filled in 18 minutes. Once you have correctly filled the reservoir, the unit will restart automatically. If the water level is still not filled for more than 18 minutes, the unit will stop. Press STRAT button to turn on the unit.

4)Press the STOP button (3) at any time, the unit will stop and the POWER light will turn to red. Please note that it will take approximately three minutes for the unit to reset itself.

5)Ice and cold water will be ready for dispensing in approx. 6-10 minutes.

6)When the ice cube storage compartment is full, the POWER light (8) will turn orange and the unit will switch to stand-by mode. If the ice is taken out or melted, the unit will restart automatically and the POWER light (8) will turn green.

7)If the water level is lower than the minimum line, the POWER light

(8)will flash in red and the unit will switch into stand-by mode until water level restored.

8)To dispense ice cubes, crushed ice or iced water, just press the

relevant button - (4), (5) or (6). Place a cup, glass, etc, under the delivery outlet required.

Note: The ICE CUBE (4) and CRUSHED ICE (5) buttons cannot be used simultaneously.

Care, cleaning & maintenance

Cleaning the Unit

To maintain hygiene, it is important that the SELF CLEAN function is used on a regular basis.

Note: The START (2) and CLEAN (12) buttons cannot be pressed simultaneously.

1)Ensure the unit is switched on.

2)If the unit has not been used for a while, drain the unit using the following steps:

•Press the ICE CUBES, CRUSHED ICE and ICED WATER buttons individually, until corresponding tanks are empty.

•Remove the Drain Plug (14) at the bottom of the unit to empty the water tank.

3)Add a solution of one part vinegar to ten parts water into the manual water fill compartment (10) at the top of the unit. Ensure water level is above the minimum otherwise the unit will not self clean.

4)At the back of the unit, press the CLEAN button (12). The unit will automatically enter into Self Clean mode and the green CLEAN light

(7)will be illuminated.

5)Press the STOP button (3) after 15 minutes to end the Self Clean cycle.

6)Once the Self Clean cycle is complete, drain the water from the unit as described in step 2 above.

7)Flush the unit at least three times to remove the cleaning mixture. To do this, repeat step 1 to 6 above using water only. When in step 2, just press the ICED WATER button (6) only.

8)Refill the reservoir to resume the ice making function.

ICE-100S specifications

The Whynter ICE-100S is an exceptional portable ice maker designed for those who prioritize convenience and efficiency in their entertaining activities or everyday use. This compact unit stands out due to its impressive performance, allowing users to create a significant amount of ice in a short period. With its capacity to produce up to 28 pounds of bullet ice cubes daily, it is ideal for parties, barbecues, and everyday needs.

One of the main features of the Whynter ICE-100S is its user-friendly operation. The machine comes with a simple control panel that allows users to select the desired ice cube size, providing the flexibility of small or large cubes depending on personal preference. The built-in water reservoir can hold up to 2.2 liters, ensuring that the unit operates efficiently without the need for constant refills.

This ice maker employs advanced technologies that enhance its functionality. The ice-making process is driven by an efficient compressor, which not only maximizes ice production but also enhances energy efficiency. As a result, users can enjoy a reliable supply of ice without worrying about high energy costs. Additionally, the Whynter ICE-100S incorporates a heat dissipation system that maintains optimal operating temperatures, ensuring durability and longevity.

In terms of design, the Whynter ICE-100S boasts a sleek and modern stainless-steel exterior, making it a stylish addition to any kitchen or outdoor setting. Its compact size allows it to fit seamlessly into small spaces, whether on a countertop or in a cabinet. The integrated handles make it easy to transport, making it perfect for camping trips, tailgating, or outdoor gatherings.

Another noteworthy characteristic of the Whynter ICE-100S is its quiet operation. Unlike many traditional ice makers that can be noisy, this unit runs quietly, allowing it to blend into any environment without causing disruption.

In conclusion, the Whynter ICE-100S offers a powerful combination of efficiency, convenience, and stylish design. With its impressive ice production capacity, advanced features, and sleek appearance, it is a practical solution for those who enjoy entertaining or simply require a steady supply of ice in their daily lives. Whether for home use or outdoor activities, this portable ice maker is sure to meet your ice-making needs with ease.