Whynter ICE-100S manual Technical Specifications, Power and push Start

		facing front and center.
	2. Unit needs to be	2. Turn off the unit for a
	restarted.	minute and turn back on
		then push Start button.
	3. Insufficient water	3. Take off the bottle and
	pressure.	manual fill the unit with
		water.
	4. Bottle has a cap or	4. Remove cap or seal then
	seal.	reposition bottle back on to
		bottle supporter. Turn on
		Power and push Start
		button.
Unit does not take in water	Water pressure is too	Reduce or increase the
from a water line.	high or low.	water pressure.
	The ice maker makes the
	loud noise when it is able
	to sense water in the fill
Unit makes loud noise,	compartment but not able	Add more water to the unit
	to draw the water into the	or adjust the water bottle.
	water tank. The loud
	noise is not an indication
	of any problem of the unit.
	Due to fast freezing, ice
	cubes may appear
Unit makes cloudy ice	"cloudy". This is trapped
cubes.	air in the water and does
	not affect the taste or
	quality of the ice.
The orange light is on (ice		Wait about 10 – 20 minutes
bin full indicator) and ice	Small pieces of ice may	and the unit should resume
was removed from the unit	stick to the ice cube bin	the ice making process and
but the unit does not	sensor.	the light will turn from
restart .		orange to green.

Technical Specifications

•Voltage: 110V

•Maximum Power: 230W

•Ice Storage: 750g

•Ice making ability: 26 Kg/24h

•Water tank capacity: 2 liter

•Iced water tank capacity: 0.8 liter

•Refrigerant Gas: R134a/80g

•Ice shape: Bullet shape

•Dimensions: 16” × 16” x 16.3” (L×W×H)

•N.W./G.W.: 53 / 57 lb

•Approvals : ETL