P A N E L C O N S I D E R A T I O N S
I N S T A L L A T I O N
The illustrations below provide panel width dimensions for installation of a single tall unit, 686 mm and 914 mm wide models.
Illustrations on the following page provide panel width dimensions for installing two tall units side by side, 686 mm wide models and 914 mm wide models.
IMPORTANT NOTE: The depth of each Integrated model is 610 mm from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit.
To install integrated panels, see the detailed procedures outlined in the
40
6 8 6 m m
W I D E M O D E L S
Panel width dimen- sions for installation of a 686 mm wide tall unit.
Dimensions are based on a 3 mm reveal. A reveal of up to 6 mm is possible, but panel dimensions need to be adjusted accordingly.
9 1 4 m m
W I D E M O D E L S
Panel width dimen- sions for installation of a 914 mm wide tall unit.
Dimensions are based on a 3 mm reveal. A reveal of up to 6 mm is possible, but panel dimensions need to be adjusted accordingly.
3 mm* min | 686 mm |
| 3 mm* min | |
679 mm |
| |||
REVEAL |
|
| REVEAL | |
| 19 mm PANEL |
|
| |
635 mm |
| 657 mm | 635 mm | |
| APPLIANCE | |||
CABINETRY |
| CABINETRY | ||
610 mm | DOOR WIDTH | |||
OR SIDE | OR SIDE | |||
| ||||
PANEL | TO BACK |
| PANEL | |
| OF UNIT |
|
| |
|
|
| ||
|
| UNIT |
| |
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL |
3 mm* min | 914 mm |
| 3 mm* min | |
908 mm |
| |||
REVEAL |
|
| REVEAL | |
| 19 mm PANEL |
|
| |
635 mm |
| 886 mm | 635 mm | |
| APPLIANCE | |||
CABINETRY |
| CABINETRY | ||
610 mm | DOOR WIDTH | |||
OR SIDE | OR SIDE | |||
| ||||
PANEL | TO BACK |
| PANEL | |
| OF UNIT |
|
| |
|
|
| ||
|
| UNIT |
| |
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL |