Sub-Zero 500 manual Product Operation, Temperature Controls, Models 501FAND 501R

Page 7

PRODUCT OPERATION

The importance of the installation of your Sub-Zero cannot be over- emphasized. The proper in- stallation of your unit is the responsibility of the selling deafer or installer. Any questions or problems pertaining to the installation should be directed to the selling dealer.

TEMPERATURE

CONTROLS

Your new refrigerator/freezer was thoroughly inspected and tested before it was shipped from the Sub-Zero factory. During these procedures, the temperatures were preset to maintain approxi- mately 38 degrees in the refrigera- tor section and approximately 0 degrees in the freezer section. If you wish to adjust the temperature, simply turn the control dial. The illuminated dial indicates the control setting, #1 warmest to #10 coldest. See Figures 1,2, and 3.

You should be aware it is normal for temperatures to fluctuate slightly depending on external influences, such as: an open door for extended periods, the degree of humidity present and room temperature.

NOTE: A/ways allow 24 hours for the refrigerator to reach the temperature you set.

MODELS 532, 542 AND 561

The refrigerator control is located on the back wall of the refrigerator near the top right. See Figure 1.

The freezer control is located on the freezer panel just above the ice drawer. To adjust, pull the drawer out, on the lefl side of the panel turn the control dial until the desired setting appears on the panel. See Figure 2.

Figure 2

MODELS 511 AND 550

The refrigerator and freezer controls are both located on the back wall of the refrigerator near the top. The refrigerator control is on the right and the freezer control is on the lett. See Figure 1.

MODELS 501FAND 501R

The temperature control for each model is located on Ihe back wall of Ihe unilnear Ihe top right. See Figure 1.

MODEL 590

The refrigerator and freezer con- trols are both located inside the refrigerator section on the left hand side at a convenient level. See Figure 3.

•

Figure 3

CRISPER DHAWt:H~

to remove your crisper drawer,

pull open until drawer slops. Raise fronl of crisper and pullout as shown in Figure 4. To reinstall: With the front of the crisper raised, insert crisper into the tracks. See Figure 4.

Figure 4

Figure 1

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ZER TSUB-ZERO~ =============== Model 511 and 550 Features Model 501F Model 501R Model 501F and MODEL501R FeaturesModel 501F Features Model 501R FeaturesCD-= Product Operation Temperature ControlsModels 501FAND 501R ROLL-OUT Refrigerator Basket Adjustable ShelvesTo remove or adjust shelves Product Operation Humidity ControlFreezer Drawer Removal Product Operation Door Shelves Dairy CompartmentModel 501F NOOR Closing IcemakerICE Dispenser Model WA TER DispenserICE Dispenser Operating Tips ICE Storage Container Light Bulb and Light Switch in Dispenser UnitIcemaker Switch Freezer Utility RackSounds Master Power SwitchMaintenance and Cleaning Automatic DefrostGrille Removal Models 501F and 501R Cleaning ProcedureStandard Grille Removal Panellized Grille RemovalDo not submerge or pour hot water over cold glass shelves Cleaning OUT the ICE Chute ModelRefrigerator Lighting Freezer Basket Lighting Models 532, 542 Freezer Lighting ModelsFreezer Control Lighting Freezer LightingProduct Loading Suggestions Food Storage Suggestions SuggestedAtof Food Storage Service Suggestions InformationFreezer If Refrigerator/Freezer runs too much If you need product serviceIf Refrigerator/Freezer is not operating If Refrigerator/Freezer is warmer than usualSUB-ZERO Freezer CO., INC

500 specifications

The Sub-Zero 500 series is a prestigious line of built-in refrigeration appliances that exemplifies elegance and advanced technology in kitchen design. Crafted for both functionality and aesthetics, these refrigerators are engineered to meet the highest standards of performance, ensuring your food and beverages are stored at optimal conditions.

One of the standout features of the Sub-Zero 500 series is its advanced dual refrigeration system. This technology utilizes separate systems for the refrigerator and freezer compartments, promoting ideal humidity levels and preventing odor transfer between the two spaces. The result is a fresher environment for perishable items, prolonging their shelf life and enhancing their taste.

Another key characteristic of the 500 series is the built-in design, allowing these units to blend seamlessly with cabinetry. The customizable front panels and handles enable homeowners to create a cohesive kitchen look that reflects their personal style. The series is available in various finishes, including stainless steel and panel-ready options, ensuring versatility in design.

Temperature control is paramount in the Sub-Zero 500 series, featuring precise microprocessor controls that maintain consistent temperatures. Adaptive defrost, another innovative technology, utilizes algorithms to determine when and how frequently defrost cycles are needed, optimizing energy efficiency while preventing ice buildup in the freezer compartment.

The 500 series also includes a water filtration system, ensuring that ice and water dispensed from the unit is fresh and clean. This system effectively reduces contaminants, providing peace of mind when it comes to family health and safety.

In terms of organization, the Sub-Zero 500 series is equipped with adjustable shelves, crispers, and door bin configurations that maximize storage space. The interior LED lighting illuminates the contents beautifully, making it easy to locate items within the refrigerator.

With an energy-efficient design that exceeds federal standards, the Sub-Zero 500 series not only enhances your kitchen's functionality but also appeals to environmentally conscious consumers.

Overall, the Sub-Zero 500 series combines cutting-edge technology with luxurious style, making it a premier choice for homeowners who prioritize quality and innovation in their kitchen appliances.
Top Page Image Contents