Hinge Adjustment, Installation Checklist

INSTALLATION INSTRUCTIONS

2)Using the Loctite on the screws, install all 3 Chicago Screw Posts.

3)Inspect the units for level again.

4)Drill three (3) 3h6" holes (per specs in Figure 24) through both outer trims.

5)Using a '/a" drill bit, drill into the cabinetry for a pilot hole.

6)Install all six (6) Sems to the cabinetry.

Instructions for fastening

Models 501R, 501F, 550, 511,561,532,542 and 590 to cabinetry (see Figure 25):

17'1/1"

17'/it"

""t

77'/8"

1)Drill three (3) 3h 6" holes (per specs in Figure 25) through both outer trims.

2)Drill a '/a" pilot hole into the cabinetry.

3)Install all six (6) Sems.

HINGE

ADJUSTMENT

Step 16

If the doors are out of adjustment, the top or bottom hinge may be adjusted by removing and discarding the two small shipping screws. See Figure 26. The top door hinges can be adjusted left to right and in or out by loosen- ing the three allen head screws. The bottom door hinge is equipped with two adjustment allen hbad screws. See Figure 27.

For adjustment, use a '/a" allen wrench to loosen screws (models 550 and 511 ex- cluded). This allows the door to move left to right or in and out.

NOTE: On Models 532, 542,

561, 501R, 501F and 590

the doors open to 130 0 •

An optional door stop kit (4-20-089-0), which allows a door opening of approxi- mately 90 0 is available. Contact your distributor.

Figure 26

Figure 27

INSTALLATION

CHECKLIST

The importance of the installa- tion of your Sub-Zero cannot be overemphasized. The proper installation of your unit is the responsibility of the selling dealer or instal- ler, The following check list should be completed by the installer to insure no part of the installation has been over- looked. Any questions or problems pertaining to the installation should be directed to the selling dealer.

o Is unit operating? If not, is unit plugged in? Is refrigeratorl freezer control on?

o Is packing material removed? (Step 6)

o Is water supply line con- nected to compression fitting? (Step 8)

IAWARNINGI

Disconnect power to unit before checking wiring connections.

o Is blocking completed? (Step 8)

o Is unit leveled properly on a solid floor? (Step 10)

o Is blocking necessary? (Step 8)

o Is drain pan installed properly? (Step 11)

o Is toe plate installed? (Step 11)

o Is grille screw back in position? (Step 12)

o Are panels installed correctly? (Step 14)

o Are doors adjusted? (Step 16)

o Does the customer under- stand the unit'soperation?

o Is the icemaker switch turned on? (Models 590, 532, 542 and 561).

Give the customer the warranty packet.

550, 542, 561, 532, 511 specifications

Sub-Zero, a renowned name in luxury refrigeration, has long set the standard for high-performance refrigeration with its exceptional line of products, including models 590, 511, 532, 561, and 542. Each of these models showcases advanced features and cutting-edge technology designed to preserve food freshness while enhancing kitchen aesthetics.

The Sub-Zero 590 is a standout model known for its dual refrigeration system, which employs separate systems for the refrigerator and freezer compartments. This innovative approach allows for optimal humidity control and temperature management, preventing cross-contamination of odors and ensuring that perishables remain fresh for longer. Additionally, the 590 boasts a sleek design that can be seamlessly integrated into any kitchen decor.

Model 511 is designed with convenience in mind. Its compact design makes it an excellent choice for smaller kitchens or bar areas. This model continues the tradition of Sub-Zero's high standards, featuring advanced cooling technologies and smart storage solutions, such as adjustable shelving and door storage, maximizing usable space without compromising on performance.

The Sub-Zero 532 elevates the refrigeration experience with its advanced air purification system, which filters out particles and ethylene gas, a natural compound that accelerates ripening in fruits and vegetables. This ensures that your food stays fresher, longer, while preserving its nutritional quality. The model also includes features such as tempered glass shelves and LED lighting, providing both functionality and elegance.

The 561 model impresses with its built-in design, allowing for perfect integration into cabinetry for a custom look. This model offers a generous capacity while maintaining a sleek exterior. Furthermore, it includes advanced technology like a microprocessor control panel that monitors and adjusts temperatures, ensuring that your food is stored under ideal conditions.

Lastly, the Sub-Zero 542 showcases a classic built-in refrigerator/freezer configuration. Its signature design includes the option for a panel-ready finish, allowing homeowners to match it to their cabinetry. With features like smart touch controls and an advanced cooling system that maintains consistent temperatures, the 542 guarantees reliability and performance.

These Sub-Zero models represent the pinnacle of refrigeration technology, with features that prioritize freshness, convenience, and luxury aesthetics, making them a perfect addition to any modern kitchen.