Model 315W Wine Storage Care | 8 |
|
|
Cleaning
CONDENSER CLEANING
Clean the condenser area every three to six months. The cleaning schedule will depend on the amount of dust and lint that accumulates in this area.
To access the condenser area, use a Phillips screwdriver to remove the kickplate. Refer to the illustration below for location of the condenser. Using a soft bristle brush, vacuum to remove dust and lint from the condenser area.
IMPORTANT NOTE: To avoid bending the condenser fins, be sure to vacuum in the direction of the fins (up and down).
CONDENSER |
Location of condenser.
Before cleaning the condenser, shut off power to the unit by turning the control knob to OFF. When you clean the condenser, wear gloves to avoid injury from the sharp condenser fins.
Failure to clean the condenser could result in tempera- ture loss or mechanical failure or damage.