Traulsen TR35788 Specifications, Elevation, Plan One-SectionPlan Two-Section, Plan Three-Section

Page 2

Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, louver assembly and doors are constructed of 20 gauge stainless steel. Cabinet sides (including returns), interior and door liners are constructed of anodized aluminum. The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

1-Section Models

2-Section Models

3-Section Models

Net capacity cu. ft.

24.2 (686 cu l)

46.0 (1303 cu l)

69.1 (1958 cu l)

Length - overall in.

2978 (75.9 cm)

5218 (132.4 cm)

76516 (193.8 cm)

Depth - overall in.

35 (88.8 cm)

35 (88.8 cm)

35 (88.8 cm)

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

32 (81.3 cm)

Depth - door open 90° in.

5758 (146.3 cm)

5758 (146.3 cm)

5758 (146.3 cm)

Clear door width in.

2118 (53.6 cm)

2118 (53.6 cm)

2118 (53.6 cm)

Clear half-door height in.

2712 (69.9 cm)

2712 (69.9 cm)

2712 (69.9 cm)

Clear full-door height in.

5758 (146.3 cm)

5758 (146.3 cm)

5758 (146.3 cm)

Height-overall on 6" casters

8314 (211.5 cm)

8314 (211.5 cm)

8314 (211.5 cm)

No. Standard Shelves

3

6

9

Shelf area sq. ft.1

18.8 (1.75 sq m)

34.6 (3.21 sq m)

51.9 (4.82 sq m)

ELECTRICAL DATA

 

 

 

Voltage

115/60/1

115/60/1

208-230/115/60/1

Feed wires with Ground

3

3

4

Full load amperes

11.3

14.9

10.8

REFRIGERATION DATA

 

 

 

Refrigerant

R-404A

R-404A

R-404A

BTU/HR H.P.2

2160 (12 HP)

3790 (34 HP)

4710 (1 HP)

SHIPPING DATA

 

 

 

Length - crated in.

35 (89 cm)

63 (160 cm)

91 (231 cm)

Depth - crated in.

43 (109 cm)

43 (109 cm)

43 (109 cm)

Height - crated in.

8312 (212 cm)

8312 (212 cm)

8312 (212 cm)

Volume - crated cu. ft.

71 (2011 cu l)

131 (3711 cu l)

189 (5354 cu l)

Net Wt. lbs.

320 (145 kg)

650 (295 kg)

690 (313 kg)

Gross Wt. lbs.

410 (186 kg)

700 (318 kg)

870 (395 kg)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on the cabinet bottom.

2= Based on a 90 degree F ambient and -20 degree F evaporator. For remote data please refer to spec sheet 13-2.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-404A refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled, hermetic compressor, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. A 9' cord and plug is provided. Standard operating temperature is 0 to -5°F.

Controller

The easy to use water resistant microprocessor control system is supplied standard. It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale Display Capability.

Interior

Standard interior arrangements include three (3) epoxy coated wire shelves per section, mounted on shelf pins, installed at the factory. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available.

Elevation

Elevation

Elevation

One-Section

Two-Section

Three-Section

Plan - One-SectionPlan - Two-Section

1-Section Models

3-Section Models

equipped with one

equipped with one NEMA

NEMA 5-15P Plug

L14-20P Plug

REQUIRED CLEARANCES

In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice. Part No. TR35788 (revised 6/08)

2-Section Models equipped with one NEMA 5-20P Plug

Plan - Three-Section

Section - All Models

SECTION

TRAULSEN

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

4-2

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

Image 2
Contents Series Reach-In Freezers Standard Product FeaturesOptional Accessory Kits Self-ContainedPlan One-SectionPlan Two-Section SpecificationsElevation Plan Three-Section