Traulsen RHT126WUT-FHS Specifications, Dimensional Data AHT126WUT AHT226WUT, Electrical Data

Page 2

Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four

(4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

R/AHT126WUT

R/AHT226WUT

Net capacity cu. ft.

19.1 (541 cu l)

40.8 (1156 cu l)

 

 

 

Length - overall in.

2978 (75.9 cm)

58 (147.3 cm)

Depth - overall in.

29 (73.6 cm)

29 (73.6 cm)

Depth - less handle in.

2734 (69.4 cm)

2734 (69.4 cm)

Depth - over body in.

26 (66.0 cm)

26 (66.0 cm)

Depth - door open 90° in.

511116 (131.3 cm)

511116 (131.3 cm)

Clear door width in.

2112 (54.6 cm)

2112 (54.6 cm)

Clear half-door height in.

2712 (69.9 cm)

2712 (69.9 cm)

Clear full-door height in.

5758 (146.3 cm)

5758 (146.3 cm)

Height - overall on 6" legs

8314 (211.5 cm)

8314 (211.5 cm)

RHT Net Wt. lbs.1

345 (156 kg)

550 (249 kg)

AHT Net Wt. lbs.1

305 (138 kg)

480 (218 kg)

No. Standard Shelves

3

6

Shelf area sq. ft.2

14.6 (1.35 sq m)

29.2 (2.71 sq m)

ELECTRICAL DATA

 

 

 

 

 

Voltage

115/60/1

115/60/1

 

 

 

Feed wires with Ground

3

3

 

 

 

Full load amperes

8.0

8.5

REFRIGERATION DATA

 

 

Refrigerant

R-134a

R-134a

BTU/HR H.P.3

2220 (13 HP)

2220 (13 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= For shipping weights and dimensions please refer to spec sheet 12-4.

2= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

3= Based on a 90 degree F ambient and 20 degree F evaporator. For information on remote models, please refer to spec sheet 12-2.

Equipped With One NEMA 5-15 P Plug

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation - R/AHT126WUTElevation - R/AHT226WUT

Plan - R/AHT226WUT

Plan - R/AHT126WUT

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice.

Part No. TR35757 (revised 1/07)

 

Section - All Models

 

 

 

 

 

SECTION

TRAULSEN

 

 

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

 

 

1-3

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

 

 

 

Website: www.traulsen.com

 

 

 

 

 

 

 

 

Image 2
Contents Deep Reach-In Refrigerator Models Standard Product FeaturesOptions & Accessories Electrical Data SpecificationsDimensional Data AHT126WUT AHT226WUT Refrigeration Data

RHT126WUT-FHS specifications

The Traulsen RHT126WUT-FHS is a premium reach-in refrigerator designed specifically for commercial food service operations. Renowned for its exceptional build quality and innovative features, this unit provides a reliable solution for businesses that require efficient storage and management of perishable goods. Its design not only emphasizes aesthetics but also functionality, ensuring that chefs and staff have easy access to ingredients without compromising on temperature control.

One of the standout features of the RHT126WUT-FHS is its advanced temperature management system. The refrigerator utilizes a mechanical thermostat with a digital display, enabling precise temperature control within the range of 33°F to 41°F. This is crucial for maintaining the freshness and safety of food items, as it minimizes the risk of bacterial growth. The unit also incorporates a powerful forced air refrigeration system that enhances temperature consistency throughout the cabinet, ensuring that all areas reach the desired climate quickly.

Designed with energy efficiency in mind, the RHT126WUT-FHS utilizes eco-friendly refrigerants as part of its commitment to sustainable operation. This not only benefits the environment but also helps businesses save on energy costs, an essential consideration in commercial settings. The unit is equipped with a high-efficiency condensing unit that reduces energy consumption without sacrificing performance.

Durability is another significant aspect of Traulsen's design philosophy. The exterior is constructed from stainless steel, providing resistance to corrosion and ensuring longevity in high-traffic environments. The door handle is ergonomically designed for easy access and is made from heavy-duty materials, offering resilience throughout its use. Moreover, with a full-height solid door that promotes energy conservation, this refrigerator is built to withstand the rigors of daily use in busy kitchens.

Inside, the RHT126WUT-FHS features adjustable shelving made from durable, easy-to-clean materials, providing flexibility for storing various food items. With a capacity of 26 cubic feet, the unit is spacious enough to accommodate a diverse array of products while maintaining organization.

In conclusion, the Traulsen RHT126WUT-FHS is a robust and efficient reach-in refrigerator tailored for the demands of the food service industry. Its advanced temperature control, energy-efficient design, and durable construction make it a valuable asset for any commercial kitchen, ensuring that operators can focus on what matters most - delivering high-quality food and service.