True Manufacturing Company TGU-3F, TGU-2 installation manual Leveling, Electrical Instructions

Page 8

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

LEVELING

Step 4

A.Set unit in its final location. Be sure there is adequate ventilation in your room. Under extreme heat conditions, (100°F+, 38°C+), you may want to install an exhaust fan.

Warning

Warranty is void if ventilation is insufficient.

B.Proper leveling of your True cooler is critical to operating success (for non-mobile models). Effective condensate removal and door operation will be effected by leveling.

C.The cooler should be leveled inside the cabinet front to back and side to side with a level.

D.Ensure that the drain hose or hoses are positioned in the pan.

E.Free plug and cord from inside the lower rear of the cooler (do not plug in).

F.The unit should be placed close enough to the electrical supply so that extension cords are never used.

Warning

Compressor warranties are void if the unit is more than 7ft. (2.1m) from plug-in connection. TRUE will not warranty any units that are connected to an extension cord.

ELECTRICAL INSTRUCTIONS

Step 5

A.Before your new unit is connected to a power supply, check the incoming voltage with a voltmeter. If anything less than 100% of the rated voltage for operation is noted, correct immediately.

B.All units are equipped with a 7 ft. (2.1m) service cord, and must be powered at proper operating voltage at all times. Refer to cabinet data plate for this voltage.

True requires that a sole circuit be dedicated for the unit. Failure to do so voids warranty.

WARNING

Compressor warranties are void if compressor burns out due to low voltage.

WARNING

Power supply cord ground should not be removed!

NOTE

To reference wiring diagram - Remove lower rear grill. Wiring diagram is positioned on the inside cabinet wall.

6

www.truemfg.com

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Table of Contents Page Safety Precautions HOW to Safely Dispose of Used Refrigeration Equipment Refrigerant DisposalImportant Electrical Safety Information USE of Extension Cords / Adapter PlugsInstallation / Operation Instructions Ownership Required ToolsUncrating LocatingInstallation of Legs and Castors Unit to upright position after installing castorsStep Securing Castors Unit LevelingLeveling Electrical InstructionsRecommendation Replacement PartsStartup Shelving Installation / Operation Required ToolsTools Required Cleaning the Condenser CoilDisconnect power to unit Stainless Steel Equipment Care and Cleaning

TGU-2, TGU-3F specifications

True Manufacturing Company is a leading provider of commercial refrigeration solutions, known for its commitment to quality, reliability, and energy efficiency. Among its renowned product lineup, the TGU-3F and TGU-2 refrigeration units stand out as premium choices for businesses looking to keep their perishable items fresh.

The True TGU-3F and TGU-2 models are designed with state-of-the-art technologies to meet the demanding requirements of commercial environments. The TGU-3F features a three-door, reach-in freezer configuration, while the TGU-2 is a two-door model. Both units are built with a sturdy, high-quality stainless steel exterior that not only provides durability but also ensures easy cleaning. The interiors are made of beneficial, food-safe materials, offering ample storage and organization for various products.

One of the standout features of the TGU series is its advanced refrigeration system. The True TGU-3F and TGU-2 utilize a factory-engineered, self-contained, capillary tube system for optimal cooling efficiency. This cooling technology helps maintain precise temperatures ranging from -10°F to 0°F for the TGU-3F, ensuring that frozen items remain in their ideal state. Meanwhile, the TGU-2, optimized for refrigerated storage, guarantees temperatures between 33°F and 38°F.

Energy efficiency is another highlight of these units. Both models come with an energy-efficient compressor that helps reduce operational costs while promoting sustainability. The units are designed with an eco-friendly refrigerant that aligns with modern environmental standards, making them a responsible choice for businesses focused on reducing their carbon footprint.

User-friendly features are prevalent in the TGU-3F and TGU-2, including tempered glass doors that provide excellent visibility of the stored products while promoting energy savings. The units are equipped with LED lighting, which enhances product display and reduces heat output compared to traditional lighting solutions.

Additionally, True Manufacturing Company offers an industry-leading warranty, reflecting their confidence in the reliability and durability of their products. The TGU-3F and TGU-2 are not just refrigeration units; they are essential tools for restaurants, grocery stores, and various commercial kitchens looking to optimize their storage needs efficiently. With their combination of innovative features, energy efficiency, and reliable performance, the True TGU-3F and TGU-2 models stand as excellent investments for any business requiring robust refrigeration solutions.
Top Page Image Contents