Sequence of Operation

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

Temperature Control Sequence of Operation

When the cabinet is plugged the unit will start up in a defrost cycle. The evaporator fan is hard-wired and will continue to run during this time. The cooler will stay in defrost for a minimum of 4 minutes or until the coil temperature reaches at least 41˚F. The maximum time the cooler will be in defrost is 40 minutes. At the end of the defrost cycle, there will be a 2 minute delay to allow any water to drip off of the evaporator coil. After this time, the compressors will come on and the cooler should start to cool down. The compressors will run until the temperature control is satisfied. Every 4 hours of compressor run time, the cooler will go into defrost and remain in defrost until the coil temperature reaches 41˚F.

NOTE:

When the unit is first plugged in it will take at least 6 minutes

before the compressor starts.

STARTUP

A.The compressor is ready to operate. Plug in the cooler.

B.Temperature control set at No. 4 position gives refrigerators an approximate temperature of 35°F. Allow unit to function several hours, completely cooling cabinet before changing the control setting.

C.Excessive tampering with the control could lead to service difficulties. Should it ever become necessary to replace temperature control, be sure it is ordered from your TRUE dealer or recommended service agent.

D.Good air flow in your TRUE unit is critical. Be careful to load product so that it neither presses against the back wall, nor comes within four inches of the evaporator housing. Refrigerated air off the coil must circulate down the back wall.

NOTE

If the cooler is disconnected or shut off, wait five minutes before starting again.

RECOMMENDATION

Before loading product we recommend you run your TRUE unit empty for two to three days. This allows you to be sure electrical wiring and installation are correct and no shipping damage

has occurred. Remember, our factory warranty does not cover product loss!

REPLACEMENT PARTS

TRUE maintains a record of the cabinet serial number for your cooler. If at any time during the life of your cooler, a part is needed, you may obtain this part by furnishing the model number and serial number to the company from whom you purchased the cooler. Call Toll-Free: (800)-424-TRUE (Direct to Parts Department). (800)-325-6152 (U.S.A. & Canada only) or call: (636)-240-2400.

TEMPERATURE CONTROL LOCATION

The temperature control is located are the back of the unit. (See image 1).

	Image 1
9	www.truemfg.com	9

TFP-32-12M-D-2 specifications

True Manufacturing Company has established itself as a leader in the refrigeration industry, providing high-quality, durable, and energy-efficient products for commercial applications. One of their noteworthy offerings is the TFP-32-12M-D-2, a top-of-the-line refrigerator that exemplifies the company's commitment to excellence.

The TFP-32-12M-D-2 is a reach-in refrigerator specifically designed for commercial kitchens, foodservice establishments, and convenience stores. Its sleek design and robust construction make it an ideal choice for businesses looking to enhance their refrigeration capabilities. One of the standout features of this unit is its impressive storage capacity, which allows for maximum organization and efficient use of space.

Equipped with two solid doors, the TFP-32-12M-D-2 provides easy access to stored items while maintaining optimal internal temperatures. The unit features a refrigerator compartment with a temperature range of 33°F to 38°F, ensuring that food products remain fresh. True's balanced refrigeration system employs a powerful, efficient compressor and a large evaporator, which ensures consistent temperature control throughout the entire interior space.

Another significant characteristic of the TFP-32-12M-D-2 is its advanced insulation technology. The unit is constructed with high-density polyurethane insulation, providing excellent thermal efficiency and minimizing energy consumption. This design feature not only contributes to the refrigeration unit's eco-friendliness but also results in reduced energy costs for the user.

In terms of technology, the TFP-32-12M-D-2 is equipped with a digital temperature display and controls, which allow for precise monitoring and adjustment of internal temperatures. This added level of control is crucial for maintaining food safety standards and ensuring that perishable items are stored under optimal conditions.

The design of this unit also focuses on durability and easy maintenance. Constructed with a stainless steel exterior, the TFP-32-12M-D-2 is both functional and aesthetically pleasing, making it a valuable asset to any commercial setting. Additionally, the self-closing doors are equipped with a 120-degree stay-open feature, enhancing accessibility during busy service times.

Overall, the True Manufacturing Company TFP-32-12M-D-2 refrigerator combines advanced technology, impressive storage capacity, and durable construction, making it a top choice for businesses seeking reliable refrigeration solutions. Its energy efficiency, temperature control capabilities, and ease of use further solidify its reputation as a premier product in the commercial refrigeration market.