AEG K 9 18 00-4 I Electrical connection, Prior to Initial Start-Up, Rehingeing the door

Page 8

Malfunction

Possible Cause

Remedy

Rehingeing the door

 

 

Temperature is not properly

 

 

adjusted.

 

 

 

 

 

Door was open for an exten-

 

 

ded period.

 

 

 

The food is too warm.

 

A large quantity of warm

 

food was placed in the

 

 

 

 

appliance within the last 24

 

 

hours.

 

 

 

 

 

The appliance is near a heat

 

 

source.

 

 

 

Please look in the "Initial Start Up" section.

Open the door only as long as necessary.

Turn the temperature regula- tor to a colder setting tempo- rarily.

Please look in the "Installation location" section.

The appliance’s door has been locked in position for transport by means of pins on both sides.According to the door opening direction, remove relevant pins at the top and at the bottom.

Warning! When changing the side at which the door opens, the appliance may not be connected to the mains. Remove plug from the mains beforehand.

Housing dimensions

Height

1780mm

Depth

550 mm

Interior lighting does not work.

Heavy build up of frost, possi- bly also on the door seal.

Unusual noises.

Light bulb is defective.

Door seal is not air tight (pos- sibly after changing over the hinges).

Appliance is not level.

The appliance is touching the wall or other objects.

A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.

Please look in the "Changing the Light Bulb" section.

Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than approx. 50 °C). At the same time shape the warmed door seal by hand such that it sits correctly.

Readjust the feet.

Move the appliance slightly.

If necessary, carefully bend the component out of the way.

Width

560 mm

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if sup- ply voltage and current values correspond with those of the mains at the installation location.

e.g.:

AC

220 ...

240 V

50 Hz or

 

220 ...

240 V~

50 Hz

 

(i.e. 220 to 240 volts alternating current, 50 Hertz) The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply. The supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electrical installation must include suitable means of isolating the appliance from the mains (e.g. fuse, cut-out, current trip or similar with a minimum contact separation of 3 mm).

Attention: The mains connection cable may only be replaced by a skilled electrician. Please contact your dealer or our customer service department

The compressor does not start

 

This is normal, no error has

The compressor starts after a

immediately after changing

 

occurred.

period of time.

the temperature setting.

 

 

 

 

 

 

 

 

 

 

Water on the floor or on sto-

 

Water drain hole is blocked.

 

See the "Cleaning and Care"

rage shelves.

 

 

 

section.

 

 

 

 

 

for repairs.

Prior to Initial Start–Up

Please clean the appliance interior and all accessories prior to initial start- up (see section: “Cleaning and Care”).

30

23

Image 8
Contents Santo K 9 18 00-4 10/04Dear customer InstallationRespect des règles d’hygiène Contents Safety Avertissements importantsDisposal SommaireDaily Operation Case of malfunctionRemove transport safeguard Chère Cliente, Cher ClientDisposal of old Appliances DisposalInstallation Installation LocationRegulations, Standards, Guidelines Changing the light bulbHousing dimensions Electrical connectionPrior to Initial Start-Up Rehingeing the doorOperating and indicator panel Temperature setting buttonsEnergy Saving Tips What to do ifCleaning and Care Temperature displayStarting Up Setting the Temperature After cleaning wipe with fresh water and rub dryInterior Accessories Switching off the applianceFresh food refrigeration Defrosting

K 9 18 00-4 I specifications

The AEG K 9 18 00-4 I is a versatile and efficient power tool designed for professional tradespeople and DIY enthusiasts alike. This cordless impact wrench stands out for its robust construction and advanced features that cater to high-demand applications, making it an essential addition to any toolkit.

One of the most notable characteristics of the AEG K 9 18 00-4 I is its powerful motor. With a maximum torque of 180 Nm, this impact wrench is capable of tackling even the toughest fastening tasks. It delivers swift performance, allowing users to easily drive larger bolts and fasteners with minimal effort. Its high-speed impact mechanism ensures rapid rotation and impact, culminating in improved efficiency and reduced working time.

The tool is built around AEG's innovative 18V battery platform, which provides exceptional power and runtime. The AEG K 9 18 00-4 I is compatible with a range of lithium-ion batteries that offer increased longevity and reduced charging time. This feature is particularly beneficial for professionals who require reliable tools that can withstand the rigors of daily use.

Ergonomically designed, the impact wrench is lightweight and easy to handle, reducing user fatigue during prolonged operation. Its soft-grip handle provides a comfortable and secure grip, enhancing overall control. Additionally, the built-in LED work light illuminates dark workspaces, ensuring that users can see what they're doing, even in challenging environments.

Another significant technology featured in the AEG K 9 18 00-4 I is the variable speed trigger. This allows operators to adjust the speed and torque settings according to the specific requirements of the job at hand. This level of customization makes it suitable for a variety of applications, from automotive work to construction tasks.

The tool is designed for durability, featuring a robust housing that can withstand the rigors of frequent use. Its impact-resistant casing protects the internal components, promoting longevity. Furthermore, the integrated electronic protection system prevents overheating, prolonging the life of both the motor and battery.

In conclusion, the AEG K 9 18 00-4 I impact wrench combines power, efficiency, and user-friendly features into a compact package. Its innovative technologies, durable design, and compatibility with the AEG battery platform make it an ideal choice for those seeking a reliable and powerful cordless tool for fastening applications. Whether for professional or home use, this impact wrench is sure to meet and exceed expectations.