AEG SCN71800S0 manual Installation

Page 25

Installation 25

8 mm

Ha

Hb

8 mm

K

Ha

Hb

Open the appliance door and the kitchen furniture door at an angle of 90°.

Insert the small square (Hb) into guide (Ha). Put together the appli- ance door and the furni- ture door and mark the holes.

Remove the brackets and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K).

Place the small square on the guide again and fix it with the screws supplied. Align the kitchen furni- ture door and the appli- ance door by adjusting the part Hb.

Image 25
Contents EN FRIDGE-FREEZER For Perfect Results Contents Children and vulnerable people safety Safety InformationGeneral safety Daily Use Care and cleaningService InstallationControl Panel Environment ProtectionSwitching off Switching onDisplay Switching on the fridge Switching off the fridgeTemperature regulation Minute Minder functionDoor open alarm High temperature alarmChild Lock function Holiday function Coolmatic functionFrostmatic function First USE Cleaning the interiorDaily USE Freezing fresh foodFrozen Food Calendar Storage of frozen foodThawing Ice-cube productionMovable shelves Helpful Hints and TipsPositioning the door shelves Positioning the sliding boxHints for refrigeration Hints for fresh food refrigerationHints for freezing Hints for storage of frozen foodPeriodic cleaning Care and CleaningDefrosting of the refrigerator Defrosting of the freezerPeriods of non-operation What to do IF…What to do if… Installation Technical DataReplacing the lamp Closing the doorElectrical Connection PositioningDoor reversibility Ventilation requirements Installing the applianceOpen the door. Put the lower hinge cover in posi- tion Fit the cover D Disconnect the parts Ha, Hb, Hc and Hd Installation Noises CrackBrrr Environmental Concerns Page Page Page 222344536-A-272011