Switching Off the Appliance, Cleaning and Care

Switching Off the Appliance

To switch off the appliance, turn the temperature regulator to position "0" or disconnect from the electricity supply.

If the appliance is not going to be used for an extended period:

1.Remove all refrigerated and deep-frozen packages as well as ice trays.

2.Remove the mains plug or switch off.

3.Defrost freezer compartment and clean thoroughly (see section: “Cleaning and Care”).

4.Leave the door open to avoid the build up of odours.

3.Clean the appliance and the inte- rior accessories with lukewarm water and with a little bicarbonate of soda added (5ml to 0,5 litre of water).

4.Dry the appliance thoroughly.

5.Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the drain cleaning tool included with the appliance.

D037

Cleaning and Care

For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly.

Warning!

Before carrying out any cleaning or maintenance, disconnect the appliance from the electricity supply.

•Never clean the appliance with a steam cleaner. Moisture could accumu- late in electrical components, which could cause an electric shock! Hot vapours can lead to the damage of plastic parts.

•The appliance must be dry before it is placed back into service.

Warning!

• Ethereal oils and organic solvents can attack plastic parts, e.g.

–lemon juice or the juice from orange peel,

–butyric acid;

–cleansers which contain acetic acid.

Do not allow such substances to come into contact with appliance parts.

•Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liqiud added.

1.Remove frozen food and the food from the refrigerator. Wrap frozen food in several layers of newspaper. Store it in a cool place, well covered.

2.Switch the appliance off and remove the plug from the mains, or switch off.

6.When everything is dry switch the appliance back on.

Energy Saving Tips

•Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor.

•Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.

•Do not place warm foods into the appliance. Allow warm foods to cool first.

•Do not leave the door open any longer than necessary.

•Do not set temperature any colder than necessary.

•Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Something Not Working

If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Warning!

Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.

C 7 18 40-4I specifications

The AEG C 7 18 40-4I is a versatile and high-performance power tool designed for both professional contractors and DIY enthusiasts. This multi-functional tool combines advanced technologies and thoughtful design features that make it a standout in the competitive market of power tools.

At its core, the AEG C 7 18 40-4I is a cordless reciprocating saw that offers remarkable flexibility. The tool is powered by a robust 18V lithium-ion battery, which not only provides longer runtime but also ensures consistent high performance throughout various cutting applications. This cordless design allows for greater mobility in tight spaces and outdoor environments where access to power outlets may be limited.

One of the main features of the AEG C 7 18 40-4I is its brushless motor technology. This feature increases efficiency and offers a longer lifespan compared to traditional brushed motors. The brushless motor generates less heat during operation, which contributes to prolonged battery life and reduces wear on the internal components, leading to a more reliable tool overall.

The AEG C 7 18 40-4I also boasts an adjustable speed setting, allowing users to tailor the cutting speed to match the material being worked on. This variable speed control is particularly beneficial for tackling different materials, whether it’s wood, metal, or plastic, providing the versatility needed for a wide range of tasks.

Another significant characteristic of the AEG C 7 18 40-4I is its tool-free blade change system. This innovative design allows for quick and efficient swapping of blades without the need for additional tools. This feature not only saves time but also enhances safety, as users can easily replace blades without coming into contact with sharp edges.

The ergonomic design of the AEG C 7 18 40-4I ensures user comfort during extended periods of use. Its lightweight build, combined with a soft-grip handle, provides superior control and reduces fatigue, making it an ideal choice for long projects.

The AEG C 7 18 40-4I is equipped with an integrated LED light, illuminating the work area and enhancing visibility in low-light conditions. This practical addition allows users to maintain precision and accuracy during their work.

In summary, the AEG C 7 18 40-4I is engineered for performance, durability, and user comfort. Its combination of brushless motor technology, variable speed control, tool-free blade changes, and ergonomic design makes it a powerful addition to any toolkit. Whether for construction professionals or home repair enthusiasts, the AEG C 7 18 40-4I delivers quality and reliability across a multitude of cutting applications.