Installation, Interior Accessories | AEG C 7 18 40-4I guide

Installation

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the

Interior Accessories

Storage Shelves

The glass shelf above the fruit and vegetable compartment should always remain in position, to ensure fruit and vegetables stay fresh longer.

The remaining storage shelves can be adjusted to various heights:

Pull the storage shelf forward until it can be tipped up or down and remo-

left.

ved.

D338

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

To insert at a different height use the same procedure in reverse. Adjustment for tall goods:

Important!

The wires in the mains lead are coloured in accordance with the fol- lowing code:

Green and Yellow Earth

BlueNeutral

BrownLive

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows:

GREEN & YELLOW	13 AMP. FUSE

13 AMP

	BROWN
	BLUE
D207	CORD CLAMP
D207

Remove the front half of the two-part vario glass storage shelf and insert it at a different level. Space is thus gained for storage of tall goods on the underlying storage shelf.

Variable Inner Door

The door compartments can be pulled up and removed, and inserted at other positions as needed.

Variable Storage Box

Some models are equipped with a variable storage box which is fitted under a door shelf compartment and can be slid sideways.

1.The wire coloured green and yellow must be connected to the terminal marked with the letter “E” or by the earth symbol or coloured green and yel- low.

2.The wire coloured blue must be connected to the terminal marked “N” or coloured black.

3.The wire coloured brown must be connected to the terminal marked “L” or coloured red.

4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

The box can be inserted under any door shelf compartment.

1.To change the position of the stora-

ge box; lift the shelf compartment with the box upwards and out of the holders in the door and remove the retaining bracket out of the guide under the shelf compartment.

2.Reverse the above operation to insert the shelf at a different height.

C 7 18 40-4I specifications

The AEG C 7 18 40-4I is a versatile and high-performance power tool designed for both professional contractors and DIY enthusiasts. This multi-functional tool combines advanced technologies and thoughtful design features that make it a standout in the competitive market of power tools.

At its core, the AEG C 7 18 40-4I is a cordless reciprocating saw that offers remarkable flexibility. The tool is powered by a robust 18V lithium-ion battery, which not only provides longer runtime but also ensures consistent high performance throughout various cutting applications. This cordless design allows for greater mobility in tight spaces and outdoor environments where access to power outlets may be limited.

One of the main features of the AEG C 7 18 40-4I is its brushless motor technology. This feature increases efficiency and offers a longer lifespan compared to traditional brushed motors. The brushless motor generates less heat during operation, which contributes to prolonged battery life and reduces wear on the internal components, leading to a more reliable tool overall.

The AEG C 7 18 40-4I also boasts an adjustable speed setting, allowing users to tailor the cutting speed to match the material being worked on. This variable speed control is particularly beneficial for tackling different materials, whether it’s wood, metal, or plastic, providing the versatility needed for a wide range of tasks.

Another significant characteristic of the AEG C 7 18 40-4I is its tool-free blade change system. This innovative design allows for quick and efficient swapping of blades without the need for additional tools. This feature not only saves time but also enhances safety, as users can easily replace blades without coming into contact with sharp edges.

The ergonomic design of the AEG C 7 18 40-4I ensures user comfort during extended periods of use. Its lightweight build, combined with a soft-grip handle, provides superior control and reduces fatigue, making it an ideal choice for long projects.

The AEG C 7 18 40-4I is equipped with an integrated LED light, illuminating the work area and enhancing visibility in low-light conditions. This practical addition allows users to maintain precision and accuracy during their work.

In summary, the AEG C 7 18 40-4I is engineered for performance, durability, and user comfort. Its combination of brushless motor technology, variable speed control, tool-free blade changes, and ergonomic design makes it a powerful addition to any toolkit. Whether for construction professionals or home repair enthusiasts, the AEG C 7 18 40-4I delivers quality and reliability across a multitude of cutting applications.