qualified service engineers. Improper repairs can give rise to signifi- cant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or our Customer Service.
Malfunction | Possible Cause | Remedy | |
| Appliance is not switched on Switch on the appliance. | ||
| Mains plug is not plugged in | Insert mains plug. | |
| or is loose. |
| |
Appliance does not work. | Fuse has blown or is defec- | Check fuse, replace if | |
tive. | necessary. | ||
| |||
| Socket is defective. | Mains malfunctions are to | |
|
| be corrected by an electri- | |
|
| cian. | |
Appliance cools too much.
Temperature is set too cold.
Temperature is not properly adjusted.
Turn the temperature regu- lator to a warmer setting temporarily..
Please look in the "Initial Start Up" section.
The food is too warm.
Door was open for an exten- Open the door only as long
ded period. | as necessary. |
A large quantity of warm | Turn the temperature regu- |
food was placed in the | lator to a colder setting tem- |
appliance within the last 24 | porarily. |
hours. |
|
The appliance is near a heat Please look in the "Installa-
source. | tion location" section. |
Interior lighting does not | Light bulb is defective. |
work. |
|
Heavy build up of frost, pos- Door seal is not air tight sibly also on the door seal. (possibly after changing
over the hinges).
Please look in the "Chan- ging the Light Bulb" section.
Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than approx. 50 ¡C). At the same time shape the war- med door seal by hand such that it sits correctly.
45