Transporting Your Refrigerator

Use & Care Guide

•NEVER transport refrigerator on its side. If an upright position is not possible, lay refrigerator on its back. Allow refrigerator to sit upright for approximately 30 minutes before plugging it in to ensure oil returns to the compressor. Plugging the refrigerator in immediately may cause damage to internal parts.

•Use an appliance dolly when moving refrigerator. ALWAYS truck refrigerator from its side or back–NEVERfrom its front.

•Protect outside finish of refrigerator during transport by wrapping cabinet in blankets or inserting padding between the refrigerator and dolly.

•Secure refrigerator to dolly firmly with straps or bungee cords. Thread straps through handles when possible. Do not overtighten. Overtightening restraints may dent or dam- age outside finish.

Connecting the Water Supply

To reduce the risk of injury or death, follow basic precautions, including the following:

•Read all instructions before installing ice maker.

•Do not attempt installation if instructions are not under- stood or if they are beyond personal skill level.

•Observe all local codes and ordinances.

•Do not service ice maker unless specifically recom- mended in Use & Care Guide or published user-repair instructions.

•Disconnect power to refrigerator before installing ice maker.

•Water damage due to an improper water connection may cause mould/mildew growth. Clean up spills or leak- age immediately

To avoid property damage or possible injury, follow basic precautions, including the fol- lowing:

•Consult a plumber to connect 1/4” O.D. copper tubing to household plumbing to assure compliance with local codes and ordinances.

•Confirm water pressure to water valve is between 35 and 100 pounds per square inch, 20 pounds per square inch if there is not a water filter.

•Do not use a self-piercing, or 3/16" saddle valve. Both reduce water flow and can become clogged over time; and may cause leaks if repair is attempted.

•Tighten nuts by hand to prevent cross threading. Finish tightening nuts with pliers and wrenches. Do not overtighten.

•Wait 2-3 hours before placing refrigerator into final position to check and correct any water leaks. Recheck for leaks after 24 hours.

•Verify the copper tubing under the sleeve is smooth, cut square and free from defects. Do not reuse an old sleeve.

Materials Needed

•1/4" outer diameter flexible copper tubing.

•Shut-off valve (requires a 1/4" hole to be drilled into water supply line before valve attachment).

•Adjustable wrench • 1/4" hex nut driver.

•In-line water filter must be installed in an accessible location to prevent dam- age to refrigerator’s water solenoid.

Note:

•Add 8' to tubing length needed to reach water supply for creation of service loop.

1.Create service loop with copper tubing (minimum 2’ diameter) Avoid kinks in the copper tubing when bending it into a service loop.

AFHR-36 specifications

The Aga Ranges AFHR-36 is a standout model in the Aga family of cookers, designed to combine practicality with an impressive array of features tailored for serious cooking enthusiasts. This model exemplifies Aga's commitment to quality, performance, and innovation.

One of the hallmark features of the AFHR-36 is its robust cast iron construction, which not only ensures durability but also excellent heat retention. This allows the oven to maintain consistent temperatures, making it ideal for various cooking techniques, from roasting to slow cooking. The large cooking cavity is spacious enough to accommodate a whole chicken or multiple dishes at once, making it perfect for family gatherings or dinner parties.

The Aga Ranges AFHR-36 utilizes advanced cooking technologies that elevate its functionality. The "Heat Storage" principle is a key aspect of its design, where the cooker retains heat long after it has been turned off, enabling energy-efficient cooking. Users can take advantage of this heat storage to prepare meals throughout the day, all while using less energy compared to conventional cookers.

Another innovative feature of the AFHR-36 is the integrated induction hob, which brings rapid and precise cooking to the table. This technology allows for instant heat adjustment, providing greater control over cooking processes. The induction element works seamlessly with the traditional cooking methods of the Aga, catering to diverse culinary preferences.

Moreover, the AFHR-36 boasts an easy-to-use interface that includes simple knobs and controls. This design caters to users of all skill levels, allowing them to operate the cooker intuitively. The model also incorporates a variety of cooking modes, enabling users to grill, bake, or simmer, making it a versatile addition to any kitchen.

Furthermore, the AFHR-36 is celebrated for its stylish aesthetic. Available in multiple vibrant colors, it can complement various kitchen designs and personal styles. The classic look of an Aga combined with modern features makes it not only a functional appliance but also a stunning centerpiece for the kitchen.

In summary, the Aga Ranges AFHR-36 is more than just a cooker; it is a versatile appliance that combines high-quality construction with advanced cooking technologies. With its thoughtful design and user-friendly features, the AFHR-36 is designed for culinary enthusiasts who value performance, efficiency, and style in their cooking experience.